UT horizontal ganged meter sockets are for single phase systems up to 600 VAC. These main lug units can be from 2 through 6 meter positions. Units can be with or with a horn or lever bypass and be fed from the end or the center. This horizontal ganged meter socket has five meter positions without bypass. Each socket position has a 4 jaw socket without jaw release. The main is rated at 500 A. The branches have a 200 A rating. This unit can be feed from an overhead or underground service. This unit has a NEMA 3R surface mounting enclosure that is 14.12 inches tall, 54.75 inches wide and 5.38 inches deep. The main lugs will accept one 1/0 AWG to 500 kcmil or with two 1/0 AWG to 350 kcmil copper or aluminum wire. The branch lugs will accept 8 AWG to 250 kcmil copper or aluminum wire. This horizontal ganged meter socket device is UL Listed.
Brand: Schneider Electric
Add to Quote Catalogue[Ue] Rated Operational Voltage | 600 V AC |
---|---|
Number Of Meter Sockets | 5 |
Line Rated Current | 200 A |
Product Or Component Type | Meter Socket |
Phase | 1 phase |
Warranty | 18 months |
Product Certifications | UL Listed |
Service Feed Location |
|
Hub Type | A-L ACPL closing plate |
Height | 14.12 in |
Nema Degree Of Protection | NEMA 3R |
Bypass Type | no bypass |
Meter Socket Type | ringless |
Wiring Configuration | 3-wire |
Width | 54.75 in |
Awg Gauge |
|
Depth | 5.38 in |
Number Of Jaws | 4 without jaw release |
Box Number | 19R |
Eu Rohs Directive | Under investigation |
California Proposition 65 | WARNING: This product can expose you to chemicals including: Nickel (Metallic), which is known to the State of California to cause cancer, and Toluene, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Powered by
Based on 2 User Reviews
1619 Boyd St, Santa Ana, CA 92705
(714) 835-6211
(714) 972-2366