Plug In Relay, Harmony Relay, power, 15A at 277VAC, 2CO contacts, 24VAC 50/60HZ coil, LED
The RPM range of power relays has relays from 1 to 4 poles with 15A contact rating. There is a good selection of relays sockets and accessories to choose from. This 2 pole relay has two CO contacts. Each contact has a common point and one normally ope and one normally closed contact. Contacts have UL operational current ratings of 15 A at 277 Vac and 15 A at 28 VDC. This relay is designed to be pluged into a relay socket. All wiring is connect to the relay socket terminals. Relay has a 24 VAC 50/60 Hz coil. This relay has a bipolar LED to indicate the relay status. Relay is UL Listed when a RPZ relay socket is used. Relay is also CSA certified. Transient protection modules and hold down clips are available for this relay. Relay is UL Listed when a RPZ relay socket is used. Relay is also CSA certified. The Harmony electromechanical relay features flexible add-on accessories like protection module, timing module, maintaining clamp and marking legend. The Harmony electromechanical relay includes interface, miniature and power relays from 1 CO to 4 CO contacts, up to 30A.
Brand: Schneider Electric
Add to Quote CatalogueSpecifications
| Utilisation Coefficient | 20 % |
|---|---|
| [Uc] Control Circuit Voltage | 24 V AC 50/60 Hz |
| Range Of Product | Harmony Electromechanical Relays |
| Product Or Component Type | plug-in relay |
| Status Led | with |
| Control Type | without lockable test button |
| Series Name | Power |
| Contacts Type And Composition | 2 C/O |
| Device Short Name | RPM |
| [Ithe] Conventional Enclosed Thermal Current | 15 A -40-55 °C |
| Warranty | 18 months |
| Maximum Switching Capacity |
|
| Safety Reliability Data | B10d = 100000 |
| Height | 27 mm |
| Operating Rate |
|
| Protection Category | RT I |
| Test Levels | level A |
| Electrical Durability | 100000 cycles resistive |
| Contacts Material | AgNi |
| Average Coil Consumption In Va | 1.1 60 Hz |
| Shape Of Pin | flat |
| Reset Time | 20 ms at nominal voltage |
| Net Weight | 0.036 kg |
| Maximum Switching Voltage | 250 V IEC |
| Average Resistance | 177 Ohm at 20 °C +/- 15 % |
| Device Presentation | complete product |
| Rated Operational Voltage Limits | 19.2...26.4 V AC |
| Pollution Degree | 3 |
| [Ie] Rated Operational Current |
|
| [Ui] Rated Insulation Voltage |
|
| Mechanical Durability | 10000000 cycles |
| Operating Position | any position |
| Operating Time | 20 ms at nominal voltage |
| Width | 21 mm |
| Load Current |
|
| Drop-Out Voltage Threshold | >= 0.15 Uc AC |
| [Uimp] Rated Impulse Withstand Voltage | 4 kV 1.2/50 µs |
| Depth | 39 mm |
| Minimum Switching Capacity | 170 mW 10 mA, 17 V |
| Rohs Exemption Information | Yes |
| Mercury Free | Yes |
| Environmental Disclosure | ENVPEP1406038EN |
| Sustainable Offer Status | Green Premium product |
| Toxic Heavy Metal Free | Yes |
| Reach Regulation | Free of Substances of Very High Concern above the threshold |
| California Proposition 65 | WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
| Reach Free Of Svhc | Yes |
| Weee | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |
| China Rohs Regulation | X |
| Eu Rohs Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
| Product Certifications |
|
| Standards |
|
| Ambient Air Temperature For Operation | -40-55 °C |
| Dielectric Strength |
|
| Vibration Resistance |
|
| Shock Resistance |
|
| Ip Degree Of Protection | IP40 conforming to EN/IEC 60529 |
| Ambient Air Temperature For Storage | -40-85 °C |
