RPM21F7
plug-in relay, Harmony electromechanical relays, 15A, 2CO, lockable test button, 120V AC
This Harmony RPM power plug-in relay has a coil control voltage of 120V AC and has 2 changeover contacts DPDT (double pole double throw) with a rating of 15A. It has large choice of number of contacts for high rated current use. It helps to reduce the size of enclosures and increases machine reliability, you can mount nearly everywhere. Plug in type enables easy installation and maintenance. Workability for hard-wired logic automated systems to complement the functions of industrial programmable logic controllers (PLCs). 0 0 0 0 0 0 0 0 0 0 0
Brand: Schneider Electric
Add to Quote CatalogueSpecifications
| Utilisation Coefficient | 20 % |
|---|---|
| [Uc] Control Circuit Voltage | 120 V AC 50/60 Hz |
| Range Of Product | Harmony Electromechanical Relays |
| Product Or Component Type | plug-in relay |
| Status Led | without |
| Control Type | lockable test button |
| Series Name | Power |
| Contacts Type And Composition | 2 C/O |
| Device Short Name | RPM |
| [Ithe] Conventional Enclosed Thermal Current | 15 A -40-55 °C |
| Warranty | 18 months |
| Maximum Switching Capacity |
|
| Safety Reliability Data | B10d = 100000 |
| Operating Rate |
|
| Protection Category | RT I |
| Test Levels | level A |
| Electrical Durability | 100000 cycles resistive |
| Contacts Material | AgNi |
| Average Coil Consumption In Va | 1.1 60 Hz |
| Shape Of Pin | flat |
| Reset Time | 20 ms at nominal voltage |
| Net Weight | 0.036 kg |
| Maximum Switching Voltage | 250 V IEC |
| Average Resistance | 4430 Ohm at 20 °C +/- 15 % |
| Device Presentation | complete product |
| Rated Operational Voltage Limits | 96...132 V AC |
| Pollution Degree | 3 |
| [Ie] Rated Operational Current |
|
| [Ui] Rated Insulation Voltage |
|
| Mechanical Durability | 10000000 cycles |
| Operating Position | any position |
| Operating Time | 20 ms at nominal voltage |
| Load Current |
|
| Drop-Out Voltage Threshold | >= 0.15 Uc AC |
| [Uimp] Rated Impulse Withstand Voltage | 4 kV 1.2/50 µs |
| Minimum Switching Capacity | 170 mW 10 mA, 17 V |
| Rohs Exemption Information | Yes |
| Mercury Free | Yes |
| Environmental Disclosure | ENVPEP1406038EN |
| Sustainable Offer Status | Green Premium product |
| Toxic Heavy Metal Free | Yes |
| Reach Regulation | Free of Substances of Very High Concern above the threshold |
| California Proposition 65 | WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
| Reach Free Of Svhc | Yes |
| Weee | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |
| China Rohs Regulation | X |
| Eu Rohs Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
| Product Certifications |
|
| Standards |
|
| Ambient Air Temperature For Operation | -40-55 °C |
| Dielectric Strength |
|
| Vibration Resistance |
|
| Shock Resistance |
|
| Ip Degree Of Protection | IP40 conforming to EN/IEC 60529 |
| Ambient Air Temperature For Storage | -40-85 °C |
