RM35TM50MW - Harmony, Modular motor voltage and temperature control relay, 5 A , 2 NO, 24..240 V AC/DC

RM35TM50MW

Harmony, Modular motor voltage and temperature control relay, 5 A , 2 NO, 24..240 V AC/DC

This Harmony RM35-T control relay allows monitoring of motor voltage and temperature control. This modular control relay is ideal for monitoring of electrical values with voltage and temperature variation in control of moving equipment's. It applies to a wide type of industrial automation applications such as hoisting, packaging, lifts, textile, water. It has one of market medium form-factors with 35mm width, allowing for a flexible and easy installation on DIN rail, using the same space as any modular 3-pole DIN device. It also offers a selectable memory function, integral LED for indicating control status, sealable cover, with simple and precise settings with screw trimmers. It provides automatic shutdown management and fault information to user for a quick fault identification and troubleshooting. Multi function controller for wide choice selected in hard-wired logic automated systems, ideal for refurbishment of old installations without using a PLC. 0 0 0 0 0 0 0 0 0 0 0 0

Brand: Schneider Electric

Add to Quote Catalogue

Specifications

Range Of Product	Harmony Control Relays
Measurement Range	208...480 V voltage AC 0...20 Ohm short-circuit detection
Switching Capacity In Va	1250 VA
Product Or Component Type	3-phase control relay
Relay Name	RM35TM
Contacts Type And Composition	2 NO
Relay Type	motor temperature control relay
Product Specific Application	for 3-phase supply
Time Delay Type	fixed 0.3 s
Relay Monitored Parameters	phase sequence motor temperature via PTC probe phase failure detection
[Uc] Control Circuit Voltage	24...240 V
Warranty	18 months
Voltage Range	176...528 V
Minimum Switching Current	10 mA 5 V DC
[Uc] Control Circuit Voltage	<= 3.6 V temperature control circuit T1-T2 terminals open)
Maximum Switching Current	5 A AC 5 A DC
Insulation Resistance	> 500 MOhm 500 V DC between supply and relay output IEC 60255-5 > 500 MOhm 500 V DC between measurement and relay output IEC 60664-1 > 1 MOhm 500 V DC between supply and measurement IEC 60255-5 > 500 MOhm 500 V DC between supply and relay output IEC 60664-1 > 500 MOhm 500 V DC between measurement and relay output IEC 60255-5 > 1 MOhm 500 V DC between supply and measurement IEC 60664-1
Operating Rate	<= 360 operations/hour full load
Power Consumption In Va	0-4 VA 24...240 V AC
Output Contacts	2 NO
Marking	CE
Response Time	> 50 ms (input Y1 (contact Y1-T1) and push-button)
Operating Position	any position without derating
Resistance Across Terminals	602 mOhm
Short-Circuit Current	0.007 A temperature sensing circuit T1-T2 terminals short circuited)
Utilisation Category	AC-12 IEC 60947-5-1 AC-13 IEC 60947-5-1 AC-14 IEC 60947-5-1 AC-15 IEC 60947-5-1 DC-12 IEC 60947-5-1 DC-13 IEC 60947-5-1
Net Weight	0.13 kg
Maximum Switching Voltage	250 V AC 250 V DC
Measurement Voltage Limits	176-528 V AC
Reset Time	10000 ms output
Connections - Terminals	screw terminals, 1 x 0.5...1 x 4 mm² AWG 20...AWG 11) solid without cable end screw terminals, 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14) solid without cable end screw terminals, 1 x 0.2...1 x 2.5 mm² AWG 24...AWG 12) flexible with cable end screw terminals, 2 x 0.2...2 x 1.5 mm² AWG 24...AWG 16) flexible with cable end
Reset Threshold	1650 Ohm +/- 10 % temperature control circuit
[Ui] Rated Insulation Voltage	400 V IEC 60664-1
Maximum Resistance	1500 Ohm temperature sensor 20 °C
Overvoltage Category	III IEC 60664-1
Tripping Threshold	3100 Ohm +/- 10 % temperature control circuit
Supply Voltage Limits	20.4-264 V AC 20.4-264 V DC
Mounting Support	35 mm symmetrical DIN rail conforming to EN/IEC 60715
Nominal Output Current	5 A
Local Signalling	for power ON LED (green) for phase of relay (R2) LED (yellow) for temperature of relay (R1) LED (yellow)
Mechanical Durability	30000000 cycles
Housing Material	self-extinguishing plastic
Control Circuit Frequency	50...60 Hz +/- 10 %
Width	35 mm
Tightening Torque	0.6-1 N.m IEC 60947-1
Maximum Power Consumption In W	0.5 W DC
Electrical Durability	10000 cycles
Run-Up Delay At Power-Up	500 ms
Supply Frequency	50/60 Hz +/- 10 %
Rohs Exemption Information	Yes
Mercury Free	Yes
Environmental Disclosure	ENVPEP1504008EN
Sustainable Offer Status	Green Premium product
Reach Regulation	Reference contains Substances of Very High Concern above the threshold
California Proposition 65	WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
China Rohs Regulation	X
Circularity Profile	ENVEOLI1504008EN
Eu Rohs Directive	Pro-active compliance (Product out of EU RoHS legal scope)
Product Certifications	GL UL GOST C-tick CSA
Standards	EN/IEC 60255-6 IEC 60034-11-2
Non-Dissipating Shock Wave	4 kV
Dielectric Test Voltage	2 kV AC 50 Hz, 1 min
Electromagnetic Compatibility	emission standard for industrial environments EN/IEC 61000-6-4 emission standard for residential, commercial and light-industrial environments EN/IEC 61000-6-3 immunity for industrial environments EN/IEC 61000-6-2
Immunity To Microbreaks	20 ms 20.4 V
Shock Resistance	15 gn 11 ms IEC 60255-21-1
Ambient Air Temperature For Operation	-20-50 °C
Vibration Resistance	0.35 mm 5-57.6 Hz)IEC 60068-2-6 1 gn 57.6-150 Hz)IEC 60255-21-1
Ip Degree Of Protection	IP20 IEC 60529 terminals) IP30 IEC 60529 casing)
Pollution Degree	3 IEC 60664-1
Directives	73/23/EEC - low voltage directive 89/336/EEC - electromagnetic compatibility
Ambient Air Temperature For Storage	-40-70 °C
Relative Humidity	95-95 % 55-55 °C IEC 60068-2-30

Harmony, Modular motor voltage and temperature control relay, 5 A , 2 NO, 24..240 V AC/DC

Specifications

Documents

Royal Wholesale Electric