This Harmony RM35-LV relay allows monitoring of level control in 3-phase networks." "This modular multi function 3-phase liquid level control relay is ideal for monitoring of electrical values in industrial and building control panels." "It applies to a wide type of industrial automation applications such as hoisting, packaging, lifts, textile, water." "It has one of market medium form-factors with 35mm width, allowing for a flexible and easy installation on DIN rail, using the same space as any modular 3-pole DIN device." "It also offers a sealable cover, simple and precise settings with screw trimmers." "It provides automatic shutdown management and fault information to user for a quick fault identification and troubleshooting." "multi function controller for wide choice selected in hard-wired logic automated systems, ideal for refurbishment of old installations without using a PLC." 0 0 0 0 0 0 0 0 0
Brand: Schneider Electric
Add to Quote CatalogueMinimum Switching Current | 10 mA 5 V DC |
---|---|
Maximum Switching Current | 5 A AC/DC |
Range Of Product | Harmony Control Relays |
Switching Capacity In Va | 1250 VA |
Product Or Component Type | level control relay |
Utilisation Category |
|
Relay Name | RM35L |
Contacts Type And Composition | 2 C/O |
Relay Type | level control relay |
Time Delay Type | adjustable 0.1...5 s, +/- 10 % |
Relay Monitored Parameters | detection by discrete sensors |
Maximum Power Consumption In Va | 5 VA AC |
Warranty | 18 months |
[Us] Rated Supply Voltage | 24...240 V AC/DC 50/60 Hz +/- 10 % |
Safety Reliability Data |
|
Control Circuit Voltage Limits | 15 % + 10 % Un |
Cable Capacitance | 10 nF probe cable |
Insulation Resistance |
|
Measurement Error | 0.5 %/°C with temperature variation |
Operating Rate | <= 360 operations/hour full load |
Output Contacts | 1 C/O |
Reset Time |
|
Marking |
|
Operating Position | any position without derating |
Maximum Switching Voltage | 250 V AC/DC |
Connections - Terminals |
|
[Ui] Rated Insulation Voltage | 250 V IEC 60664-1 |
Overvoltage Category | III IEC 60664-1 |
Supply Voltage Limits | 20.4-264 V AC/DC |
Mounting Support | 35 mm symmetrical DIN rail conforming to EN/IEC 60715 |
Nominal Output Current | 5 A |
Local Signalling |
|
Mechanical Durability | 30000000 cycles |
Maximum Supply Current For Sensors | 40 mA |
Housing Material | self-extinguishing plastic |
Measurement Accuracy |
|
Width | 35 mm |
Tightening Torque | 0.6-1 N.m IEC 60947-1 |
Maximum Power Consumption In W | 1.5 W DC |
Sensitivity Adjustment | 5-100 % |
Electrical Durability | 100000 cycles |
Run-Up Delay At Power-Up | 0.5 s |
Repeat Accuracy | +/- 2 % time delay |
Rohs Exemption Information | Yes |
Mercury Free | Yes |
Environmental Disclosure | ENVPEP1504008EN |
Sustainable Offer Status | Green Premium product |
Reach Regulation | Reference contains Substances of Very High Concern above the threshold |
California Proposition 65 | WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
China Rohs Regulation | X |
Circularity Profile | ENVEOLI1504008EN |
Eu Rohs Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
Product Certifications |
|
Standards | EN/IEC 60255-6 |
Dielectric Test Voltage |
|
Electromagnetic Compatibility |
|
Immunity To Microbreaks |
|
Ambient Air Temperature For Operation | -20-50 °C |
Ip Degree Of Protection |
|
Pollution Degree | 3 IEC 60664-1 |
Ambient Air Temperature For Storage | -40-70 °C |
Relative Humidity | 95-95 % 55-55 °C IEC 60068-2-30 |
Powered by
Based on 2 User Reviews
1619 Boyd St, Santa Ana, CA 92705
(714) 835-6211
(714) 972-2366