This Harmony RM35-HZ control relay allows monitoring of frequency control. This modular control relay is ideal for monitoring of frequency variations in electrical power sources such as wind turbine and micro-power stations. It has one of market medium form-factors with 35mm width, allowing for a flexible and easy installation on DIN rail, using the same space as any modular 3-pole DIN device. It also offers a selectable memory function, integral LED for indicating control status, sealable cover, with simple and precise settings with screw trimmers. It provides an automatic detection of abnormal electrical values before they incur serious damage to machinery thus reducing your maintenance and downtime costs. Multi function controller for wide choice selected in hard-wired logic automated systems, ideal for refurbishment of old installations without using a PLC. 0 0 0 0 0 0 0 0 0 0 0 0 0
Brand: Schneider Electric
Add to Quote CatalogueMinimum Switching Current | 10 mA 5 V DC |
---|---|
Range Of Product | Harmony Control Relays |
Measurement Range | 40...70 Hz frequency |
Switching Capacity In Va | 1250 VA |
Product Or Component Type | frequency control relay |
Utilisation Category |
|
Relay Name | RM35HZ21FM |
Relay Type | frequency control relays |
Time Delay Type | adjustable 0.1...10 s, +/- 10 % on crossing the threshold |
Relay Monitored Parameters | overfrequency and underfrequency 50 or 60 Hz |
Maximum Power Consumption In Va | 6 VA AC |
Warranty | 18 months |
Maximum Measuring Cycle | 200 ms measurement cycle as true rms value |
Hysteresis | 0.3-0.3 % fixed |
Insulation Resistance |
|
Measurement Error |
|
[Us] Rated Supply Voltage | 120...277 V AC |
Operating Rate | <= 360 operations/hour full load |
Status Led |
|
Output Contacts | 1 C/O + 1 C/O |
Contacts Material | cadmium free |
Marking |
|
Operating Position | any position without derating |
Maximum Switching Voltage | 250 V AC/DC |
Threshold Setting |
|
Reset Time | 2000 ms time delay |
Connections - Terminals |
|
[Ui] Rated Insulation Voltage | 400 V IEC 60664-1 |
Overvoltage Category | III IEC 60664-1 |
Insulation | no galvanic insulation between supply and measurement |
Supply Voltage Limits | 102-308 V AC |
Mounting Support | 35 mm symmetrical DIN rail conforming to EN/IEC 60715 |
Nominal Output Current | 5 A |
Mechanical Durability | 30000000 cycles |
Input Frequency | 70 Hz |
Housing Material | self-extinguishing plastic |
Control Circuit Voltage Limits | 15 % + 10 % Un |
Control Circuit Frequency | 40...70 Hz |
Measurement Accuracy |
|
Width | 35 mm |
Tightening Torque | 0.6-1 N.m IEC 60947-1 |
Electrical Durability | 100000 cycles |
Run-Up Delay At Power-Up | 0.5 s |
Repeat Accuracy |
|
Supply Frequency | 50/60 Hz +/- 10 % |
Rohs Exemption Information | Yes |
Mercury Free | Yes |
Environmental Disclosure | ENVPEP1504008EN |
Sustainable Offer Status | Green Premium product |
Reach Regulation | Reference contains Substances of Very High Concern above the threshold |
California Proposition 65 | WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
China Rohs Regulation | X |
Circularity Profile | ENVEOLI1504008EN |
Eu Rohs Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
Product Certifications |
|
Ambient Air Temperature For Operation | -20-50 °C |
Standards |
|
Immunity To Microbreaks | 10 ms |
Dielectric Test Voltage | 2 kV AC 50 Hz |
Electromagnetic Compatibility |
|
Shock Resistance | 15 gn 11 ms IEC 60255-21-1 |
Vibration Resistance |
|
Ip Degree Of Protection |
|
Pollution Degree | 3 IEC 60664-1 |
Ambient Air Temperature For Storage | -40-70 °C |
Relative Humidity | 95-95 % 55-55 °C IEC 60068-2-30 |
Non-Dissipating Shock Wave | 4 kV |
Powered by
Based on 2 User Reviews
1619 Boyd St, Santa Ana, CA 92705
(714) 835-6211
(714) 972-2366