This Harmony RM35-BA control relay allows monitoring of pump control. This modular pump control relay is ideal for monitoring of electrical values in industrial and building control panels. It applies to a wide type of industrial automation applications such as hoisting, packaging, lifts, textile, water. It has one of market medium form-factors with 35mm width, allowing for a flexible and easy installation on DIN rail, using the same space as any modular 3-pole DIN device. It also offers a selectable memory function, integral LED for indicating control status, sealable cover, with simple and precise settings with screw trimmers. It provides automatic shutdown management and fault information to user for a quick fault identification and troubleshooting. Multi function controller for wide choice selected in hard-wired logic automated systems, ideal for refurbishment of old installations without using a PLC. 0 0 0 0 0 0 0 0 0 0 0 0
Brand: Schneider Electric
Add to Quote CatalogueMinimum Switching Current | 10 mA 5 V DC |
---|---|
Maximum Switching Current | 5 A AC/DC |
Range Of Product | Harmony Control Relays |
Measurement Range | 1...10 A AC |
Switching Capacity In Va | 1250 VA |
Product Or Component Type | pump control relay |
Utilisation Category |
|
Relay Name | RM35BA |
Relay Type | pump control relays |
Product Specific Application | for 3-phase and single-phase pump |
Time Delay Type |
|
Relay Monitored Parameters |
|
Maximum Power Consumption In Va | 5 VA AC |
Warranty | 18 months |
Maximum Measuring Cycle | 140 ms as true rms value |
Hysteresis | 5-5 % threshold |
Insulation Resistance |
|
[Us] Rated Supply Voltage |
|
Operating Rate | <= 360 operations/hour full load |
Status Led |
|
Output Contacts | 1 C/O |
Reset Time | 2000 ms |
Marking |
|
Response Time | < 300 ms (in the event of a fault) |
Input Current |
|
Maximum Switching Voltage | 250 V AC/DC |
Connections - Terminals |
|
[Ui] Rated Insulation Voltage | 400 V IEC 60664-1 |
Overvoltage Category | III IEC 60664-1 |
Supply Voltage Limits | 183-528 V AC |
Mounting Support | 35 mm symmetrical DIN rail conforming to EN/IEC 60715 |
Nominal Output Current | 5 A |
Mechanical Durability | 30000000 cycles |
Housing Material | self-extinguishing plastic |
Resistance Across Terminals | 0.01 Ohm E1-L2 terminals |
Operating Position | any position |
Control Circuit Voltage Limits | 15 % + 10 % Un |
Measurement Accuracy | +/- 10 % of the full scale value |
Measurement Error |
|
Width | 35 mm |
Tightening Torque | 0.6-1 N.m IEC 60947-1 |
Electrical Durability | 100000 cycles |
[Us] Rated Supply Voltage |
|
Run-Up Delay At Power-Up | 0.5 s |
Supply Frequency | 50/60 Hz +/- 10 % |
Repeat Accuracy |
|
Rohs Exemption Information | Yes |
Mercury Free | Yes |
Environmental Disclosure | ENVPEP1504008EN |
Sustainable Offer Status | Green Premium product |
Reach Regulation | Reference contains Substances of Very High Concern above the threshold |
California Proposition 65 | WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Weee | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |
China Rohs Regulation | X |
Circularity Profile | ENVEOLI1504008EN |
Eu Rohs Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
Product Certifications |
|
Ambient Air Temperature For Operation | -20-50 °C |
Standards | EN/IEC 60255-6 |
Immunity To Microbreaks | 500 ms |
Electromagnetic Compatibility |
|
Shock Resistance | 15 gn 11 ms IEC 60255-21-1 |
Vibration Resistance |
|
Ip Degree Of Protection |
|
Pollution Degree | 3 IEC 60664-1 |
Ambient Air Temperature For Storage | -40-70 °C |
Relative Humidity | 95-95 % 55-55 °C IEC 60068-2-30 |
Dielectric Strength | 2 kV AC 50 Hz shock wave 4 kV) |
Powered by
Based on 2 User Reviews
1619 Boyd St, Santa Ana, CA 92705
(714) 835-6211
(714) 972-2366