This Harmony RM35-A control relay allows monitoring of temperature control." "This modular control relay is ideal for monitoring of electrical values and temperature variation in industrial and building control panels." "It applies to a wide type of industrial automation applications such as hoisting, packaging, lifts, textile, water." "It has one of market medium form-factors with 35mm width, allowing for a flexible and easy installation on DIN rail, using the same space as any modular 3-pole DIN device." "It also offers a selectable memory function, integral LED for indicating control status, sealable cover, with simple and precise settings with screw trimmers." "It provides automatic shutdown management and fault information to user for a quick fault identification and troubleshooting." "Multi function controller for wide choice selected in hard-wired logic automated systems, ideal for refurbishment of old installations without using a PLC." 0 0 0 0 0 0 0 0 0
Brand: Schneider Electric
Add to Quote CatalogueMinimum Switching Current | 10 mA 5 V DC |
---|---|
Range Of Product | Harmony Control Relays |
Switching Capacity In Va | 1250 VA |
Product Or Component Type | temperature control relay |
Utilisation Category |
|
Relay Name | RM35AT |
Time Delay Range | 0.1...10 s adjustable 0...10 % of the full scale value) |
Relay Type | temperature control relays |
Product Specific Application | for elevator machine rooms and 3-phase supplies |
Relay Monitored Parameters |
|
Maximum Power Consumption In Va | 3.5 VA AC |
Warranty | 18 months |
Temperature Probe Type | Pt 100 - 3-wire |
Insulation Resistance |
|
[Us] Rated Supply Voltage | 24...240 V AC/DC |
Operating Rate | <= 360 operations/hour full load |
Status Led |
|
Output Contacts | 2 NO |
Contacts Material | cadmium free |
Installed Device | Pt 100 probe cable length <= 10 m |
Reset Time | 8 s |
Marking |
|
Response Time |
|
Operating Position | any position without derating |
Maximum Switching Voltage | 250 V AC/DC |
Connections - Terminals |
|
[Ui] Rated Insulation Voltage | 250 V IEC 60664-1 |
Overvoltage Category | III IEC 60664-1 |
Insulation | galvanic insulation between supply and measurement |
Supply Voltage Limits |
|
Mounting Support | 35 mm symmetrical DIN rail conforming to EN/IEC 60715 |
Nominal Output Current | 5 A |
Mechanical Durability | 30000000 cycles |
Housing Material | self-extinguishing plastic |
Resistance Across Terminals | 1.33 kOhm temperature |
Control Circuit Voltage Limits |
|
Measurement Accuracy | +/- 2 °C |
Width | 35 mm |
Tightening Torque | 0.6-1 N.m IEC 60947-1 |
Maximum Power Consumption In W | 0.6 W DC |
Electrical Durability | 100000 cycles |
Run-Up Delay At Power-Up | 0.2 s |
Supply Frequency | 50/60 Hz +/- 10 % |
Rohs Exemption Information | Yes |
Mercury Free | Yes |
Environmental Disclosure | ENVPEP1504008EN |
Sustainable Offer Status | Green Premium product |
Reach Regulation | Reference contains Substances of Very High Concern above the threshold |
California Proposition 65 | WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Weee | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |
China Rohs Regulation | X |
Circularity Profile | ENVEOLI1504008EN |
Eu Rohs Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
Product Certifications |
|
Ambient Air Temperature For Operation | -20-50 °C |
Standards |
|
Immunity To Microbreaks | 10 ms |
Dielectric Test Voltage | 2 kV AC 50 Hz, 1 min |
Electromagnetic Compatibility |
|
Shock Resistance | 15 gn 11 ms IEC 60255-21-1 |
Vibration Resistance |
|
Ip Degree Of Protection |
|
Pollution Degree | 3 IEC 60664-1 |
Ambient Air Temperature For Storage | -40-70 °C |
Non-Dissipating Shock Wave | 4 kV |
Powered by
Based on 2 User Reviews
1619 Boyd St, Santa Ana, CA 92705
(714) 835-6211
(714) 972-2366