Product Certifications |
|
---|---|
[Uc] Control Circuit Voltage | 24 V DC |
[Ue] Rated Operational Voltage |
|
Power Dissipation Per Pole |
|
Average Impedance | 2.5 mOhm - Ith 25 A 50 Hz power circuit |
Auxiliary Contact Composition | 1 NO + 1 NC |
[Ith] Conventional Free Air Thermal Current |
|
Phase Failure Sensitivity | phase difference > 40% 3-3 s IEC 60947-4-1 |
Mounting Support |
|
Control Circuit Type | DC standard |
Standards |
|
Safety Reliability Level |
|
Contactor Application |
|
Relay Application | motor protection |
Rated Breaking Capacity | 250 A 440 V power circuit IEC 60947 |
Product Or Component Type | motor starter |
Irms Rated Making Capacity |
|
Associated Fuse Rating |
|
[Uimp] Rated Impulse Withstand Voltage | 6 kV IEC 60947 |
Connections - Terminals |
|
Range | TeSys |
Pole Contact Composition | 3 NO |
Utilisation Category |
|
Maximum Operating Rate | 3600 cyc/h 60 °C |
Tightening Torque |
|
Mechanical Durability | 30 Mcycles |
Poles Description | 3P |
Operating Time |
|
Overvoltage Category | III |
Motor Power Kw |
|
Maximum Horse Power Rating |
|
[Ui] Rated Insulation Voltage |
|
Protective Cover | with |
Time Range | 1.5...4 min - automatic reset time |
Non-Overlap Time |
|
Minimum Switching Current | 5 mA signalling circuit |
[Ith] Conventional Free Air Thermal Current | 5 A signalling circuit |
Tightening Torque |
|
Control Circuit Voltage Limits |
|
[Ue] Rated Operational Voltage |
|
Contact Compatibility | M4 |
Thermal Protection Adjustment Range | 0.1-0.5 A |
Power Consumption In W | 300 mW |
Contactor Coil Voltage | 24 V DC standard |
Hold-In Power Consumption In W | 5.4-5.4 W 20 °C |
Insulation Resistance | > 10 MOhm signalling circuit |
Ip Degree Of Protection |
|
Thermal Overload Class | class 5…30 |
Associated Fuse Rating |
|
Power Range |
|
[Uimp] Rated Impulse Withstand Voltage | 6 kV |
Connections - Terminals |
|
Coil Technology | built-in bidirectional peak limiting diode suppressor |
Time Constant | 28 ms |
[Ui] Rated Insulation Voltage |
|
Motor Starter Type | direct on-line contactor |
Minimum Switching Voltage | 17 V signalling circuit |
Tripping Threshold | 1.25 In IEC 60947-4-1 |
Signalling Circuit Frequency | 25...400 Hz |
Control Type |
|
Mounting Support |
|
Inrush Power In W | 5.4-5.4 W 20 °C) |
Auxiliary Contacts Type |
|
Mechanical Robustness |
|
Mechanical Robustness |
|
Ambient Air Temperature For Operation | -5-60 °C |
Height | 77 mm |
Standards |
|
Ambient Air Temperature For Operation | -25-70 °C IEC 60255-8 |
Pollution Degree | 3 |
Product Certifications |
|
Electromagnetic Compatibility |
|
Dielectric Strength | 6 kV 50 Hz IEC 60255-5 |
Net Weight | 0.48 kg |
Depth | 79.9 mm |
Flame Retardance | V1 conforming to UL 94 |
Ambient Air Temperature For Storage | -55-80 °C |
Ambient Air Temperature For Storage | -60-80 °C |
Width | 45 mm |
Height | 72.5 mm |
Protective Treatment | TH IEC 60068-2-30 |
Net Weight | 0.18 kg |
Ip Degree Of Protection | IP20 front face IEC 60529 |
Operating Altitude | 9842.52 ft (3000 m) without derating |
Fire Resistance | 850 °C IEC 60695-2-1 |
Depth | 95 mm |
Permissible Ambient Air Temperature Around The Device | -40-70 °C at Uc |
Powered by
Based on 2 User Reviews
1619 Boyd St, Santa Ana, CA 92705
(714) 835-6211
(714) 972-2366