TeSys K IEC motor control contactors are used in industrial control applications. This Type K IEC nonreversing contactor has 3 normally open contacts. This 9A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 2HP at 200 to 208VAC, 3HP at 240VAC, 5HP at 480VAC and 5HP at 600VAC three phase. Contactor is also rated for 0.5HP at 115VAC and 1.5HP at 240VAC single phase. The IEC contactor has a 200/208 VAC 50/60 Hz coil. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. Contactor is supplied with one normally open auxiliary contact. The contactor is 2.28 inches tall, 1.77 inches wide and 2.24 inches deep. It weighs 0.40 lbs. This IEC contactor is UL Listed and CSA certified.
Brand: Schneider Electric
Add to Quote CatalogueContactor Application |
|
---|---|
Product Or Component Type | contactor |
Range | TeSys |
Device Application | control |
Warranty | 18 months |
Minimum Switching Current | 5 mA signalling circuit |
Mechanical Robustness |
|
[Uc] Control Circuit Voltage | 200...208 V AC 50/60 Hz |
[Ue] Rated Operational Voltage |
|
Height | 58 mm |
Average Impedance | 3 mOhm - Ith 20 A 50 Hz power circuit |
Auxiliary Contact Composition | 1 NO |
Control Circuit Voltage Limits |
|
Non Overlap Distance | 0.5 mm |
[Ith] Conventional Free Air Thermal Current |
|
Control Circuit Type | AC 50/60 Hz |
Safety Reliability Level |
|
Insulation Resistance | > 10 MOhm signalling circuit |
Rated Breaking Capacity |
|
Irms Rated Making Capacity |
|
Motor Power Kw |
|
Associated Fuse Rating |
|
[Uimp] Rated Impulse Withstand Voltage | 8 kV |
Inrush Power In Va | 30-30 VA 20 °C) |
Connections - Terminals |
|
Pole Contact Composition | 3 NO |
Utilisation Category |
|
[Ie] Rated Operational Current |
|
Minimum Switching Voltage | 17 V signalling circuit |
Maximum Operating Rate | 3600 cyc/h |
Signalling Circuit Frequency | <= 400 Hz |
Electrical Durability |
|
Mechanical Durability | 10 Mcycles |
Auxiliary Contacts Type | instantaneous 1 NO |
Poles Description | 3P |
Hold-In Power Consumption In Va | 4.5-4.5 VA 20 °C) |
Operating Time |
|
Width | 45 mm |
Overvoltage Category | III |
Depth | 57 mm |
[Icw] Rated Short-Time Withstand Current |
|
Heat Dissipation | 1.3-1.3 W |
Rohs Exemption Information | Yes |
Mercury Free | Yes |
Environmental Disclosure | ENVPEP1503003EN |
Sustainable Offer Status | Green Premium product |
Toxic Heavy Metal Free | Yes |
Reach Regulation | Free of Substances of Very High Concern above the threshold |
California Proposition 65 | WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov |
Reach Free Of Svhc | Yes |
Weee | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |
China Rohs Regulation | Pro-active China RoHS declaration (out of China RoHS legal scope) |
Circularity Profile | ENVEOLI1503003EN |
Eu Rohs Directive | Compliant |
Product Certifications |
|
Standards |
|
Flame Retardance |
|
Protective Treatment |
|
Operating Altitude | 6561.68 ft (2000 m) without derating |
Powered by
Based on 2 User Reviews
1619 Boyd St, Santa Ana, CA 92705
(714) 835-6211
(714) 972-2366