LC1D95L7 - IEC contactor, TeSys D, nonreversing, 95A, 60HP at 480VAC, 3 phase, 3 pole, 3 NO, 200VAC 50/60Hz coil, open style

LC1D95L7

IEC contactor, TeSys D, nonreversing, 95A, 60HP at 480VAC, 3 phase, 3 pole, 3 NO, 200VAC 50/60Hz coil, open style

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 95A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 25HP at 200 to 208VAC, 30HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Contactor is also rated for 7.5HP at 115VAC and 15HP at 240VAC single phase. Contactor is supplied with a 200 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.35 inches wide and 5.12 inches deep. It weighs 3.55 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

Brand: Schneider Electric

Add to Quote Catalogue

Specifications

[Uc] Control Circuit Voltage	200 V AC 50/60 Hz
[Ue] Rated Operational Voltage	power circuit <= 690 V AC 25...400 Hz
Range Of Product	TeSys Deca
Contactor Application	resistive load motor control
Product Or Component Type	contactor
Range	TeSys
Utilisation Category	AC-3 AC-3e AC-4 AC-1
[Ie] Rated Operational Current	95 A 60 °C) <= 440 V AC-3 power circuit 125 A 60 °C) <= 690 V AC-1 power circuit
Poles Description	3P
Device Short Name	LC1D
Warranty	18 months
Non-Overlap Time	1.5 ms on de-energisation between NC and NO contacts 1.5 ms on energisation between NC and NO contacts
Minimum Switching Current	5 mA signalling circuit
Power Dissipation Per Pole	12.5 W AC-1 7.2 W AC-3
Average Impedance	0.8 mOhm - Ith 125 A 50 Hz power circuit
Auxiliary Contact Composition	1 NO + 1 NC
[Ith] Conventional Free Air Thermal Current	10 A 60 °C signalling circuit 125 A 60 °C power circuit
Control Circuit Voltage Limits	0.3...0.6 Uc -40-70 °C drop-out AC 50/60 Hz 0.8...1.1 Uc -40-55 °C operational AC 50 Hz 0.85...1.1 Uc -40-55 °C operational AC 60 Hz 1...1.1 Uc 55-70 °C operational AC 50/60 Hz
Mounting Support	plate rail
Control Circuit Type	AC 50/60 Hz
Safety Reliability Level	B10d = 1.3 Mcycles contactor with nominal load EN/ISO 13849-1 B10d = 20 Mcycles contactor with mechanical load EN/ISO 13849-1
Insulation Resistance	> 10 MOhm signalling circuit
Rated Breaking Capacity	1100 A 440 V power circuit IEC 60947
Irms Rated Making Capacity	1100 A 440 V AC power circuit IEC 60947 140 A AC signalling circuit IEC 60947-5-1 250 A DC signalling circuit IEC 60947-5-1
Associated Fuse Rating	10 A gG signalling circuit IEC 60947-5-1 160 A gG <= 690 V type 2 power circuit 200 A gG <= 690 V type 1 power circuit
[Uimp] Rated Impulse Withstand Voltage	8 kV IEC 60947
Inrush Power In Va	245-245 VA 50 Hz 0.75 20 °C) 245-245 VA 60 Hz 0.75 20 °C)
Pole Contact Composition	3 NO
Connections - Terminals	control circuit screw clamp terminals 1 1-4 mm² rigid control circuit screw clamp terminals 2 1-4 mm² rigid control circuit screw clamp terminals 1 1-4 mm² flexible without cable end control circuit screw clamp terminals 2 1-4 mm² flexible without cable end control circuit screw clamp terminals 1 1-2.5 mm² flexible with cable end control circuit screw clamp terminals 2 1-2.5 mm² flexible with cable end power circuit screw terminals 1 4-50 mm² rigid power circuit screw terminals 2 4-25 mm² rigid power circuit screw terminals 1 4-50 mm² flexible without cable end power circuit screw terminals 2 4-25 mm² flexible without cable end power circuit screw terminals 1 4-50 mm² flexible with cable end power circuit screw terminals 2 4-16 mm² flexible with cable end
Coil Technology	without built-in suppressor module
Operating Time	20...35 ms closing 6...20 ms opening
Minimum Switching Voltage	17 V signalling circuit
Maximum Operating Rate	3600 cyc/h 60 °C
Tightening Torque	control circuit 1.2 N.m screw clamp terminal flat Ø 6 mm control circuit 1.2 N.m screw clamp terminal Philips No 2 power circuit 12 N.m screw terminal flat Ø 6 to Ø 8 mm power circuit 12 N.m screw terminal hex (Allen key) 4 mm control circuit 1.2 N.m screw clamp terminal pozidriv No 2
Electrical Durability	1.2 Mcycles 95 A AC-3 1.3 Mcycles 125 A AC-1
Mechanical Durability	4 Mcycles
Auxiliary Contacts Type	mechanically linked 1 NO + 1 NC IEC 60947-5-1 mirror contact 1 NC IEC 60947-4-1
Compatibility Code	LC1D
Hold-In Power Consumption In Va	26-26 VA 50 Hz 0.3 20 °C) 26-26 VA 60 Hz 0.3 20 °C)
Overvoltage Category	III
Maximum Horse Power Rating	7.5 hp 115 V at AC 60 Hz for 1 phase 15 hp 230/240 V at AC 60 Hz for 1 phase 25 hp 200/208 V at AC 60 Hz for 3 phase 30 hp 230/240 V at AC 60 Hz for 3 phase 60 hp 460/480 V at AC 60 Hz for 3 phase 60 hp 575/600 V at AC 60 Hz for 3 phase
Motor Power Kw	25 kW 220...230 V AC 50 Hz AC-3) 45 kW 380...400 V AC 50 Hz AC-3) 45 kW 415...440 V AC 50 Hz AC-3) 55 kW 500 V AC 50 Hz AC-3) 45 kW 660...690 V AC 50 Hz AC-3) 15 kW 400 V AC 50 Hz AC-4) 25 kW 220...230 V AC 50 Hz AC-3e) 45 kW 380...400 V AC 50 Hz AC-3e) 45 kW 415...440 V AC 50 Hz AC-3e) 55 kW 500 V AC 50 Hz AC-3e) 45 kW 660...690 V AC 50 Hz AC-3e)
[Ui] Rated Insulation Voltage	power circuit 1000 V IEC 60947-4-1 power circuit 600 V CSA power circuit 600 V UL signalling circuit 690 V IEC 60947-1 signalling circuit 600 V CSA signalling circuit 600 V UL
[Icw] Rated Short-Time Withstand Current	1100 A 40 °C - 1 s power circuit 800 A 40 °C - 10 s power circuit 400 A 40 °C - 1 min power circuit 135 A 40 °C - 10 min power circuit 140 A - 100 ms signalling circuit 120 A - 500 ms signalling circuit 100 A - 1 s signalling circuit
Heat Dissipation	6-10 W 50/60 Hz control circuit
Protective Cover	with
Rohs Exemption Information	Yes
Mercury Free	Yes
Environmental Disclosure	ENVPEP110205EN
Sustainable Offer Status	Green Premium product
Toxic Heavy Metal Free	Yes
Reach Regulation	Free of Substances of Very High Concern above the threshold
Reach Free Of Svhc	Yes
Weee	The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
China Rohs Regulation	Pro-active China RoHS declaration (out of China RoHS legal scope)
Eu Rohs Directive	Compliant
Product Certifications	IECEE CB Scheme UL CSA CCC EAC LROS (Lloyds register of shipping) RINA BV DNV-GL
Height	127 mm
Standards	EN/IEC 60947-1 EN/IEC 60947-4-1 EN/IEC 60947-5-1 UL 60947-4-1 UL 60947-5-1 CSA C22.2 No 60947-4-1 CSA C22.2 No 60947-5-1 GB/T 14048.4
Climatic Withstand	IACS E10 exposure to damp heat
Net Weight	1.61 kg
Flame Retardance	V1 conforming to UL 94
Protective Treatment	TH 3)IEC 60068-2-30
Ip Degree Of Protection	IP20 IEC 60529
Mechanical Robustness	shocks contactor opened 8 Gn for 11 ms) shocks contactor closed 10 Gn for 11 ms) vibrations contactor opened 2 Gn, 5...300 Hz) vibrations contactor closed 3 Gn, 5...300 Hz)
Operating Altitude	0...9842.52 ft (0...3000 m)
Fire Resistance	850 °C IEC 60695-2-1
Width	85 mm
Depth	130 mm

IEC contactor, TeSys D, nonreversing, 95A, 60HP at 480VAC, 3 phase, 3 pole, 3 NO, 200VAC 50/60Hz coil, open style

Specifications

Documents

Royal Wholesale Electric