TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 110A resistive load rating. Contactor is supplied with a 48 VAC 50/60 Hz coil. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.78 inches wide and 4.92 inches deep. It weighs 3.88 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.
Brand: Schneider Electric
Add to Quote Catalogue[Uc] Control Circuit Voltage | 48 V AC 50/60 Hz |
---|---|
[Ue] Rated Operational Voltage |
|
Range Of Product | TeSys Deca |
Contactor Application | resistive load |
Product Or Component Type | contactor |
Range | TeSys |
Utilisation Category |
|
[Ie] Rated Operational Current |
|
Poles Description | 4P |
Device Short Name | LC1D |
Warranty | 18 months |
Power Dissipation Per Pole | 12.5 W AC-1 |
Average Impedance | 0.8 mOhm - Ith 125 A 50 Hz power circuit |
[Ith] Conventional Free Air Thermal Current | 125 A 60 °C power circuit |
Control Circuit Voltage Limits |
|
Mounting Support |
|
Contact Compatibility | M1 |
Control Circuit Type | AC 50/60 Hz |
Safety Reliability Level |
|
Pollution Degree | 3 |
Rated Breaking Capacity | 1100 A 440 V power circuit IEC 60947 |
Irms Rated Making Capacity | 1100 A 440 V power circuit IEC 60947 |
Associated Fuse Rating |
|
[Uimp] Rated Impulse Withstand Voltage | 8 kV IEC 60947 |
Inrush Power In Va |
|
Pole Contact Composition | 4 NO |
Connections - Terminals |
|
Coil Technology | without built-in suppressor module |
Operating Time |
|
Maximum Operating Rate | 3600 cyc/h 60 °C |
Tightening Torque |
|
Electrical Durability | 0.8 Mcycles 125 A AC-1 <= 440 V |
Mechanical Durability | 4 Mcycles |
Compatibility Code | LC1D |
Hold-In Power Consumption In Va |
|
Overvoltage Category | III |
Motor Power Kw |
|
[Ui] Rated Insulation Voltage |
|
[Icw] Rated Short-Time Withstand Current |
|
Heat Dissipation | 6-10 W 50/60 Hz |
Protective Cover | without |
Rohs Exemption Information | Yes |
Mercury Free | Yes |
Environmental Disclosure | ENVPEP110205EN |
Sustainable Offer Status | Green Premium product |
Pvc Free | Yes |
Toxic Heavy Metal Free | Yes |
Reach Regulation | Free of Substances of Very High Concern above the threshold |
California Proposition 65 | WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov |
Reach Free Of Svhc | Yes |
Weee | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |
China Rohs Regulation | Pro-active China RoHS declaration (out of China RoHS legal scope) |
Eu Rohs Directive | Compliant |
Product Certifications |
|
Height | 127 mm |
Standards |
|
Climatic Withstand | IACS E10 exposure to damp heat |
Net Weight | 1.76 kg |
Flame Retardance | V1 conforming to UL 94 |
Protective Treatment | THIEC 60068-2-30 |
Ip Degree Of Protection | IP20 front face IEC 60529 |
Mechanical Robustness |
|
Operating Altitude | 0...9842.52 ft (0...3000 m) |
Fire Resistance | 850 °C IEC 60695-2-1 |
Width | 96 mm |
Depth | 125 mm |
Permissible Ambient Air Temperature Around The Device |
|
Powered by
Based on 2 User Reviews
1619 Boyd St, Santa Ana, CA 92705
(714) 835-6211
(714) 972-2366