LC1D40M7 - IEC contactor, TeSys D, nonreversing, 40A, 30HP at 480VAC, up to 100kA SCCR, 3 phase, 3 NO, 220VAC 50/60Hz coil, open

LC1D40M7

IEC contactor, TeSys D, nonreversing, 40A, 30HP at 480VAC, up to 100kA SCCR, 3 phase, 3 NO, 220VAC 50/60Hz coil, open

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 40A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 10HP at 200 to 208VAC, 10HP at 240VAC, 30HP at 480VAC and 30HP at 600VAC three phase. Contactor is also rated for 3HP at 115VAC and 5HP at 240VAC single phase. When used with a 480VAC up to 110A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 90A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 220 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.17 inches wide and 4.72 inches deep. It weighs 1.87 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

Brand: Schneider Electric

Add to Quote Catalogue

Specifications

[Uc] Control Circuit Voltage	220 V AC 50/60 Hz
[Ue] Rated Operational Voltage	power circuit <= 690 V AC 25...400 Hz
Range Of Product	TeSys Deca
Contactor Application	motor control resistive load
Product Or Component Type	contactor
Range	TeSys
Utilisation Category	AC-1 AC-4 AC-2 AC-3 AC-3e
[Ie] Rated Operational Current	40 A 60 °C) <= 440 V AC AC-3 power circuit 60 A 60 °C) <= 440 V AC AC-1 power circuit 40 A 60 °C) <= 440 V AC AC-3e power circuit
Poles Description	3P
Device Short Name	LC1D
Warranty	18 months
Non-Overlap Time	1.5 ms on de-energisation between NC and NO contacts 1.5 ms on energisation between NC and NO contacts
Minimum Switching Current	5 mA control circuit
Power Dissipation Per Pole	5.4 W AC-1 2.4 W AC-3 2.4 W AC-3e
Auxiliary Contact Composition	1 NO + 1 NC
Terminals Description Iso N°1	(21-22)NC (13-14)NO (A1-A2)CO
[Ith] Conventional Free Air Thermal Current	10 A 60 °C control circuit 60 A 60 °C power circuit
Control Circuit Voltage Limits	0.3...0.6 Uc -40-70 °C drop-out AC 50/60 Hz 0.8...1.1 Uc -40-60 °C operational AC 50 Hz 0.85...1.1 Uc -40-60 °C operational AC 60 Hz 1...1.1 Uc 60-70 °C operational AC 50/60 Hz
Mounting Support	plate rail
Control Circuit Type	AC 50/60 Hz
Safety Reliability Level	B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
Insulation Resistance	> 10 MOhm control circuit
Rated Breaking Capacity	800 A 440 V power circuit IEC 60947
Irms Rated Making Capacity	800 A 440 V power circuit IEC 60947 140 A AC control circuit IEC 60947-5-1
Associated Fuse Rating	10 A gG control circuit IEC 60947-5-1 80 A gG <= 690 V type 1 power circuit 80 A gG <= 690 V type 2 power circuit
[Uimp] Rated Impulse Withstand Voltage	8 kV IEC 60947
Inrush Power In Va	140-140 VA 0.75 20 °C) 160-160 VA 0.75 20 °C)
Pole Contact Composition	3 NO
Connections - Terminals	control circuit screw clamp terminals 1 1-4 mm² rigid control circuit screw clamp terminals 2 1-4 mm² rigid control circuit screw clamp terminals 1 1-4 mm² flexible without cable end control circuit screw clamp terminals 2 1-4 mm² flexible without cable end control circuit screw clamp terminals 1 1-2.5 mm² flexible with cable end control circuit screw clamp terminals 2 1-2.5 mm² flexible with cable end power circuit screw terminals 1 2.5-25 mm² rigid power circuit screw terminals 2 2.5-16 mm² rigid power circuit screw terminals 1 2.5-25 mm² flexible without cable end power circuit screw terminals 2 2.5-16 mm² flexible without cable end power circuit screw terminals 1 2.5-25 mm² flexible with cable end power circuit screw terminals 2 2.5-10 mm² flexible with cable end
Coil Technology	without built-in bidirectional peak limiting diode suppressor
Operating Time	4...19 ms opening 12...26 ms closing
Minimum Switching Voltage	17 V control circuit
Maximum Operating Rate	3600 cyc/h 60 °C
Tightening Torque	control circuit 1.7 N.m screw clamp terminal flat Ø 6 mm control circuit 1.7 N.m screw clamp terminal Philips No 2 power circuit 5 N.m screw terminal flat Ø 6 to Ø 8 mm control circuit 1.7 N.m lugs pozidriv No 2
Mechanical Durability	6000000 cycles
Auxiliary Contacts Type	mechanically linked 1 NO + 1 NC IEC 60947-5-1 mirror contact 1 NC IEC 60947-4-1
Compatibility Code	LC1D
Hold-In Power Consumption In Va	13-13 VA 60 Hz 0.3 20 °C) 15-15 VA 50 Hz 0.3 20 °C)
Overvoltage Category	III
Maximum Horse Power Rating	3 hp 115 V at AC 60 Hz for 1 phase 5 hp 230/240 V at AC 60 Hz for 1 phase 10 hp 200/208 V at AC 60 Hz for 3 phase 10 hp 230/240 V at AC 60 Hz for 3 phase 30 hp 460/480 V at AC 60 Hz for 3 phase 30 hp 575/600 V at AC 60 Hz for 3 phase
Motor Power Kw	18.5 kW 380...400 V AC 50 Hz AC-3) 22 kW 500 V AC 50 Hz AC-3) 30 kW 660...690 V AC 50 Hz AC-3) 22 kW 1000 V AC 50 Hz AC-3) 22 kW 415 V AC 50 Hz AC-3) 22 kW 440 V AC 50 Hz AC-3) 11 kW 220...230 V AC 50 Hz AC-3) 9 kW 400 V AC 50 Hz AC-4) 18.5 kW 380...400 V AC 50 Hz AC-3e) 22 kW 500 V AC 50 Hz AC-3e) 30 kW 660...690 V AC 50 Hz AC-3e) 22 kW 1000 V AC 50 Hz AC-3e) 22 kW 415 V AC 50 Hz AC-3e) 22 kW 440 V AC 50 Hz AC-3e) 11 kW 220...230 V AC 50 Hz AC-3e)
[Ui] Rated Insulation Voltage	control circuit 600 V CSA control circuit 600 V UL power circuit 600 V CSA power circuit 600 V UL control circuit 690 V IEC 60947-1 power circuit 690 V IEC 60947-1
Heat Dissipation	4-5 W 50/60 Hz control circuit
Protective Cover	with
Rohs Exemption Information	Yes
Mercury Free	Yes
Environmental Disclosure	ENVPEP1503009EN
Sustainable Offer Status	Green Premium product
Pvc Free	Yes
Toxic Heavy Metal Free	Yes
Reach Regulation	Free of Substances of Very High Concern above the threshold
California Proposition 65	WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Reach Free Of Svhc	Yes
Weee	The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
China Rohs Regulation	Pro-active China RoHS declaration (out of China RoHS legal scope)
Circularity Profile	ENVEOLI1503009EN
Eu Rohs Directive	Compliant
Product Certifications	LROS (Lloyds register of shipping) DNV GL BV CCC RINA CSA UL GOST UKCA
Height	127 mm
Standards	EN 60947-4-1 IEC 60947-5-1 CSA C22.2 No 14 EN 60947-5-1 IEC 60947-4-1 UL 508
Climatic Withstand	IACS E10 exposure to damp heat
Net Weight	1.4 kg
Flame Retardance	V1 conforming to UL 94
Ip Degree Of Protection	IP2X IEC 60529 IP2X VDE 0106
Mechanical Robustness	shocks contactor opened 10 Gn for 11 ms) shocks contactor closed 15 Gn for 11 ms) vibrations contactor opened 2 Gn, 5...300 Hz) vibrations contactor closed 4 Gn, 5...300 Hz)
Operating Altitude	0...9842.52 ft (0...3000 m)
Fire Resistance	850 °C IEC 60695-2-1
Width	75 mm
Depth	119 mm

IEC contactor, TeSys D, nonreversing, 40A, 30HP at 480VAC, up to 100kA SCCR, 3 phase, 3 NO, 220VAC 50/60Hz coil, open

Specifications

Documents

Royal Wholesale Electric