PowerPacT J-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT J-Frame circuit breakers are available with either thermal magnetic or MicroLogic electronic trip protection units. This PowerPacT J-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 50kA at 600VAC. All PowerPacT J-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT J circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. This unit has terminal nuts on the line side and lugs on the load side. This PowerPacT J, 175A, 3 pole, circuit breaker has a breaking capacity of 50kA at 600VAC. This circuit breaker has a continuous current rating of 80%. PowerPacT J circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
Brand: Schneider Electric
Add to Quote CatalogueProduct Or Component Type | circuit breaker |
---|---|
Warranty | 18 months |
Mounting Mode | unit mount lug) |
Network Frequency | 50/60 Hz |
Terminal Identifier | AL175JD |
[Ics] Rated Service Breaking Capacity |
|
Trip Unit Technology | thermal-magnetic |
Height | 191 mm |
[Ue] Rated Operational Voltage | 600 V AC 50/60 Hz IEC 60947-3 |
Tightening Torque | 25-25 N.m 25-95 mm² (AWG 4...AWG 4/0) |
Mounting Support | lug |
Breaking Capacity Code | L |
Magnetic Tripping Current | 1750-1750 A |
Local Signalling | switched off (OFF) 1 trip indicator green) |
Number Of Slots |
|
Electrical Connection |
|
Net Weight | 2.4 kg |
[Uimp] Rated Impulse Withstand Voltage | 8 kV IEC 60947-2 |
Magnetic Hold Current | 875 A |
Control Type | toggle |
Circuit Breaker Application | HACR rated |
Wire Stripping Length | 25 mm |
Utilisation Category | category A |
Line Rated Current | 175-175 A |
Long Time Pick-Up Adjustment Range | 0.25...1 x In |
Continuous Current Rating | 80 % |
Breaking Capacity |
|
[Ui] Rated Insulation Voltage | 750 V IEC 60947-2 |
Suitability For Isolation | yes IEC 60947-2 |
Communication Interface | Modbus |
Poles Description | 3P |
Protection Type |
|
Awg Gauge | AWG 4...AWG 4/0 aluminium/copper terminal |
Width | 104 mm |
Depth | 86 mm |
Rohs Exemption Information | Yes |
Mercury Free | Yes |
Environmental Disclosure | ENVPEP2206031EN |
Sustainable Offer Status | Green Premium product |
Pvc Free | Yes |
Reach Regulation | Reference contains Substances of Very High Concern above the threshold |
California Proposition 65 | WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Weee | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |
China Rohs Regulation | Product out of China RoHS scope. Substance declaration for your information. |
Circularity Profile | ENVEOLI2206031EN |
Eu Rohs Directive | Compliant |
Ambient Air Temperature For Operation | -2-70 °C |
Standards |
|
Product Certifications |
|
Ip Degree Of Protection | front cover IP40 |
Pollution Degree | 3 |
Ambient Air Temperature For Storage | -50-85 °C |
Quality Labels | CE |
Operating Altitude |
|
Powered by
Based on 2 User Reviews
1619 Boyd St, Santa Ana, CA 92705
(714) 835-6211
(714) 972-2366