PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 25kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. PowerPacT H I-Line circuit breakers are available in I-Line construction for easy installation and removal in I-Line applications. This breaker has I-Line terminations on the line side and mechanical lugs on the load side. This PowerPacT H, 20A, 3 pole, circuit breaker has a breaking capacity of 25kA at 600VAC. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. This unit includes a factory installed 120VAC shunt trip. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
Brand: Schneider Electric
Add to Quote CatalogueProduct Or Component Type | circuit breaker |
---|---|
Product Name | PowerPact H |
Range | PowerPact |
Device Application | distribution |
Warranty | 18 months |
Mounting Mode | I-Line bracket) |
Network Frequency | 50/60 Hz |
Terminal Identifier | AL150HD |
[Ics] Rated Service Breaking Capacity |
|
Trip Unit Technology | thermal-magnetic |
Height | 163 mm |
[Ue] Rated Operational Voltage | 690 V AC 50/60 Hz IEC 60947-3 |
Tightening Torque |
|
Mounting Support | bracket |
Breaking Capacity Code | J |
Accessory / Separate Part Type | shunt trip 110...130 V AC compartment |
Magnetic Tripping Current | 750-750 A |
Local Signalling | switched off (OFF) 1 trip indicator green) |
Number Of Slots |
|
Protected Poles Description | 3t |
Electrical Connection |
|
Mounting Height | 4.5 in |
Net Weight | 2.2 kg |
[Uimp] Rated Impulse Withstand Voltage | 8 kV IEC 60947-2 |
Magnetic Hold Current | 350 A |
Control Type | toggle |
Circuit Breaker Application | HACR rated |
Wire Stripping Length | 16 mm |
Utilisation Category | category A |
Line Rated Current | 20-20 A |
Continuous Current Rating | 80 % |
Breaking Capacity |
|
[Ui] Rated Insulation Voltage | 750 V IEC 60947-2 |
Suitability For Isolation | yes IEC 60947-2 |
Communication Interface |
|
Poles Description | 3P |
Quantity Per Set | 1 |
Awg Gauge | AWG 14...AWG 3/0 aluminium/copper terminal |
Color | Black |
Width | 104 mm |
Depth | 86 mm |
Phase Connection | ABC |
Rohs Exemption Information | Yes |
Mercury Free | Yes |
Environmental Disclosure | ENVPEP2206027EN |
Sustainable Offer Status | Green Premium product |
Pvc Free | Yes |
Reach Regulation | Reference contains Substances of Very High Concern above the threshold |
California Proposition 65 | WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
China Rohs Regulation | Product out of China RoHS scope. Substance declaration for your information. |
Circularity Profile | ENVEOLI2206027EN |
Eu Rohs Directive | Compliant |
Ambient Air Temperature For Operation | -2-70 °C |
Standards |
|
Product Certifications |
|
Ip Degree Of Protection | front cover IP40 IEC 60529 |
Pollution Degree | 3 IEC 60947-1 |
Ambient Air Temperature For Storage | -50-85 °C |
Quality Labels | CE |
Operating Altitude |
|
Powered by
Based on 2 User Reviews
1619 Boyd St, Santa Ana, CA 92705
(714) 835-6211
(714) 972-2366