AC servo motor BSH, Lexium 32, 0.38N.m, 9000rpm, keyed shaft, without brake, IP50
This product is part of the Lexium 32 range, an offer of servo motors from 0.15kW to 11kW. The 10-pole AC servo motor features maximum mechanical speed of 10,000RPM and keyed shaft end without holding brake. It is an equipped with a single-turn SinCos Hiperface® feedback with 32,768 points/turn speed feedback resolution. It is a servo motor with a rated supply voltage of 400V, a continuous stall current of 1.5A and a continuous power of 398W. The shaft dimensions are 8mm (diameter) x 25mm (length). It is furnished with rotatable right angled connectors for electrical connection. It is an IP50 standard rated product. The length of this product is 93.4mm and the centering collar dimensions are 2.5mm (depth) x 30mm (diameter) with 46mm mounting hole. It weighs 0.6kg. This range is compatible with Lexium 32 servo drives. It supports 40mm international standard flange mount with a natural convection cooling system. Lexium 32 is a servo drive range provides drive and motor combination that has exactly the right power, performance and functionality. The Lexium 32 range of servo drives includes four servo drive models with power ratings from 0.15kW to 11kW and the servo motor ranges BMH and BSH series.
Brand: Schneider Electric
Add to Quote CatalogueSpecifications
| Maximum Mechanical Speed | 10000 rpm |
|---|---|
| Mounting Support | international standard flange |
| Holding Brake | without |
| Speed Feedback Resolution | 32768 points/turn |
| Product Or Component Type | servo motor |
| Nominal Output Power |
|
| Peak Stall Torque |
|
| Ip Degree Of Protection | IP50 standard |
| Shaft End | keyed |
| Nominal Speed |
|
| Electrical Connection | rotatable right-angled connectors |
| Nominal Torque |
|
| Device Short Name | BSH |
| Continuous Stall Torque |
|
| Circle Diameter Of The Mounting Holes | 46 mm |
| Maximum Permanent Current | 1.5 A |
| Continuous Power | 398 W |
| Switching Frequency | 8 kHz |
| Stator Electrical Time Constant | 1.1 ms 20 °C |
| Number Of Motor Stacks | 2 |
| Rotor Inertia | 0.0419 kg.cm² |
| Number Of Motor Poles | 10 |
| Back Emf Constant | 18 V/krpm 20 °C |
| Maximum Axial Force Fa | 0.2 x Fr |
| Centring Collar Depth | 2.5 mm |
| Second Shaft | without second shaft end |
| Shaft Length | 25 mm |
| Phase | three phase |
| Length | 93.4 mm |
| Maximum Current Irms |
|
| Net Weight | 0.6 kg |
| Centring Collar Diameter | 30 mm |
| Stator Inductance | 12.8 mH 20 °C |
| Motor Flange Size | 40 mm |
| [Us] Rated Supply Voltage | 400 V |
| Number Of Mounting Holes | 4 |
| Shaft Diameter | 8 mm |
| Key Width | 12 mm |
| Mounting Holes Diameter | 4.5 mm |
| Type Of Cooling | natural convection |
| Feedback Type | single turn SinCos Hiperface |
| Stator Resistance | 11.6 Ohm 20 °C |
| Range Compatibility | Lexium 32 |
| Continuous Stall Current | 1.5 A |
| Torque Constant | 0.253 N.m/A 120 °C |
| Rohs Exemption Information | Yes |
| Mercury Free | Yes |
| Environmental Disclosure | ENVPEP111049EN |
| Sustainable Offer Status | Green Premium product |
| Pvc Free | Yes |
| Reach Regulation | Reference contains Substances of Very High Concern above the threshold |
| California Proposition 65 | WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
| Weee | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |
| China Rohs Regulation | X |
| Eu Rohs Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
