This product is part of the Lexium SD3 and motors an offer of 3-phase stepper drives and stepper motors. The 6-pole stepper motor features 8mm smooth shaft, centring collar of 38mm, without holding brake and second shaft end. It provides a high holding torque, that makes it an optimum solution in applications such pick and place, etc. It is a 3-phase stepper motor with a rated current of 0.9A, a mechanical speed of 3000RPM and a supply voltage of 230V AC, 325V DC. It is furnished with connector for electrical connection. The shaft dimensions are 8mm (Diameter) x 21mm (Length). It offers service life of about 20000h (bearing). It is an IP41 and IP56 rated product. Its dimensions are 116mm (Length) x 57.2mm (Width), centring collar dimensions are 1.6mm (Depth) x 38mm (Diameter) with 66.6mm circle diameter of the mounting hole. It weighs 2kg. This stepper motor is particularly suitable for short-distance positioning, such as labelling. It meets EN 50347 and IEC 60072-1 standards. This stepper motor is compatible with Lexium SD3 stepper drives. It supports 57.2mm flange mount with a natural convection cooling system. 4 mounting holes with 5.2mm diameter. The SD3 is an universally applicable stepper motor drive. The package is ready for operation within a very short period of time. Connect the stepper motor to the drive, set the current and step resolution. The 3-phase stepper motor with a very high-power density. It carries out precise step-by-step movements that are controlled by a drive. The 3-phase stepper motor is accurate, powerful and sturdy and excel with a high-power density.
Brand: Schneider Electric
Add to Quote CatalogueMaximum Mechanical Speed | 3000 rpm |
---|---|
Mounting Support | flange |
Number Of Motor Poles | 6 |
Product Or Component Type | motion control motor |
Length | 116 mm |
Centring Collar Diameter | 38 mm |
Motor Flange Size | 57.2 mm |
Motor Type | 3-phase stepper motor |
Supply Voltage Limits |
|
Range Compatibility | Lexium SD3 |
Device Short Name | BRS3 |
Warranty | 18 months |
Circle Diameter Of The Mounting Holes | 66.6 mm |
Maximum Radial Force Fr |
|
Nominal Torque | 1.5 N.m |
Rotor Inertia | 0.38 kg.cm² |
Continuous Stall Torque | 1.53 N.m |
Centring Collar Depth | 1.6 mm |
Holding Brake | without |
Second Shaft | without second shaft end |
Shaft Length | 21 mm |
Net Weight | 2 kg |
Resolution |
|
Angular Acceleration | 200000 rad/s² |
Maximum Starting Frequency | 8.5 kHz |
Time Constant | 4.6 ms |
Peak Stall Torque | 1.53 N.m |
Number Of Mounting Holes | 4 |
Holding Torque | 1.7 N.m |
Shaft Diameter | 8 mm |
Mounting Holes Diameter | 5.2 mm |
Service Life In Hours | 20000 h bearing) |
Resistance | 25 Ohm winding) |
Shaft End | smooth shaft |
Electrical Connection | connector |
Line Rated Current | 0.9 A |
Accuracy Error | +/- 6 arc min |
Maximum Axial Force Fa |
|
Rohs Exemption Information | Yes |
Mercury Free | Yes |
Environmental Disclosure | ENVPEP111101EN |
Sustainable Offer Status | Green Premium product |
Pvc Free | Yes |
Reach Regulation | Reference contains Substances of Very High Concern above the threshold |
California Proposition 65 | WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Weee | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |
China Rohs Regulation | X |
Eu Rohs Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
Ambient Air Temperature For Operation | -25-40 °C |
Standards |
|
Temperature Class | F winding IEC/EN 60034-1 |
Vibration Resistance |
|
Ambient Air Temperature For Storage | -25-70 °C |
Type Of Cooling | natural convection |
Relative Humidity | 15-85 % without condensation |
Ip Degree Of Protection |
|
Operating Altitude | <= 3280.84 ft (1000 m) without power derating |
Powered by
Based on 2 User Reviews
1619 Boyd St, Santa Ana, CA 92705
(714) 835-6211
(714) 972-2366