servo motor BMH, Lexium 32, 65Nm, 3500rpm, keyed shaft, without brake, IP65, IP67, 128bit encoder
This product is part of the Lexium 32 range, an offer of servo motors from 0.15kW to 11kW. The 10-pole servo motor features maximum mechanical speed of 3500RPM and keyed shaft end without holding brake. It is an equipped with a single-turn SinCos Hiperface® feedback with 1,31,072 points/turn speed feedback resolution. It is a servo motor with a rated supply voltage of 480V, a continuous stall current of 36.1A and a continuous power of 7.95W. The shaft dimensions are 38mm (diameter) x 80mm (length). It is furnished with rotatable right angled connectors for electrical connection. It is an IP65 and IP67 rated product. The length of this product is 310mm and the centering collar dimensions are 4mm (depth) x 180mm (diameter) with 215mm mounting hole. It weighs 43kg. This range is compatible with Lexium 32 servo drives. This product is compatible with LXM32.D72N4 at 400V to 480V three phase. It supports 190mm international standard flange mount with a natural convection cooling system. Lexium 32 is a servo drive range provides drive and motor combination that has exactly the right power, performance and functionality. The Lexium 32 range of servo drives includes four servo drive models with power ratings from 0.15kW to 11kW and the servo motor ranges BMH and BSH series.
Brand: Schneider Electric
Add to Quote CatalogueSpecifications
| Maximum Mechanical Speed | 3500 rpm |
|---|---|
| Mounting Support | international standard flange |
| Holding Brake | without |
| Speed Feedback Resolution | 131072 points/turn |
| Product Or Component Type | servo motor |
| Nominal Output Power |
|
| Peak Stall Torque |
|
| Product Compatibility | LXM32.D72N4 400...480 V three phase |
| Ip Degree Of Protection |
|
| Shaft End | keyed |
| Nominal Speed |
|
| Electrical Connection | rotatable right-angled connectors |
| Nominal Torque |
|
| Device Short Name | BMH |
| Continuous Stall Torque |
|
| Warranty | 18 months |
| Circle Diameter Of The Mounting Holes | 215 mm |
| Maximum Permanent Current | 124.5 A |
| Continuous Power | 7.95 W |
| Stator Electrical Time Constant | 27.8 ms 20 °C |
| Maximum Radial Force Fr | 4500 N 1000 rpm |
| Number Of Motor Stacks | 3 |
| Rotor Inertia | 194.1 kg.cm² |
| Number Of Motor Poles | 10 |
| Back Emf Constant | 129.2 V/krpm 120 °C |
| Maximum Axial Force Fa | 0.2 x Fr |
| Centring Collar Depth | 4 mm |
| Second Shaft | without second shaft end |
| Shaft Length | 80 mm |
| Phase | three phase |
| Length | 310 mm |
| Maximum Current Irms | 72 A LXM32.D72N4 |
| Net Weight | 43 kg |
| Centring Collar Diameter | 180 mm |
| Stator Inductance | 3.62 mH 20 °C |
| Motor Flange Size | 190 mm |
| [Us] Rated Supply Voltage | 480 V |
| Number Of Mounting Holes | 4 |
| Shaft Diameter | 38 mm |
| Key Width | 70 mm |
| Mounting Holes Diameter | 14 mm |
| Type Of Cooling | natural convection |
| Feedback Type | single turn SinCos Hiperface |
| Stator Resistance | 0.13 Ohm 20 °C |
| Range Compatibility | Lexium 32 |
| Continuous Stall Current | 36.1 A |
| Torque Constant | 1.8 N.m/A 120 °C |
| Rohs Exemption Information | Yes |
| Mercury Free | Yes |
| Environmental Disclosure | ENVPEP111049EN |
| Sustainable Offer Status | Green Premium product |
| Pvc Free | Yes |
| Reach Regulation | Reference contains Substances of Very High Concern above the threshold |
| California Proposition 65 | WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
| Weee | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |
| China Rohs Regulation | X |
| Eu Rohs Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
