BMH1001P31F1A - servo motor BMH, Lexium 32, 3.3Nm, 6000rpm, keyed shaft, with brake, IP65, IP67, 128bit encoder, straight

BMH1001P31F1A

servo motor BMH, Lexium 32, 3.3Nm, 6000rpm, keyed shaft, with brake, IP65, IP67, 128bit encoder, straight

Add to Quote Catalogue

Specifications

Maximum Mechanical Speed	6000 rpm
Mounting Support	international standard flange
Holding Brake	with
Speed Feedback Resolution	131072 points/turn
Product Or Component Type	servo motor
Nominal Output Power	800 W LXM32.D12N4 3 A, 400 V, three phase 800 W LXM32.D12N4 3 A, 480 V, three phase 1300 W LXM32.D18N4 6 A, 400 V, three phase 1300 W LXM32.D18N4 6 A, 480 V, three phase
Peak Stall Torque	10.8 N.m LXM32.D12N4 3 A, 400 V, three phase 10.8 N.m LXM32.D12N4 3 A, 480 V, three phase 10.8 N.m LXM32.D18N4 6 A, 400 V, three phase 10.8 N.m LXM32.D18N4 6 A, 480 V, three phase
Product Compatibility	LXM32.D12N4 400...480 V three phase LXM32.D18N4 400...480 V three phase
Ip Degree Of Protection	IP65 standard IP67 with IP67 kit
Shaft End	keyed
Nominal Speed	4000 rpm LXM32.D12N4 3 A, 400 V, three phase 4000 rpm LXM32.D12N4 3 A, 480 V, three phase 4000 rpm LXM32.D18N4 6 A, 400 V, three phase 4000 rpm LXM32.D18N4 6 A, 480 V, three phase
Electrical Connection	straight connectors
Nominal Torque	1.9 N.m LXM32.D12N4 3 A, 400 V, three phase 1.9 N.m LXM32.D12N4 3 A, 480 V, three phase 3.1 N.m LXM32.D18N4 6 A, 400 V, three phase 3.1 N.m LXM32.D18N4 6 A, 480 V, three phase
Device Short Name	BMH
Continuous Stall Torque	3.3 N.m LXM32.D12N4 3 A, 400 V, three phase 3.3 N.m LXM32.D12N4 3 A, 480 V, three phase 3.4 N.m LXM32.D18N4 6 A, 400 V, three phase 3.4 N.m LXM32.D18N4 6 A, 480 V, three phase
Warranty	18 months
Circle Diameter Of The Mounting Holes	115 mm
Maximum Permanent Current	11.93 A
Continuous Power	1.76 W
Stator Electrical Time Constant	4.5 ms 20 °C
Holding Torque	5.5 N.m holding brake
Maximum Radial Force Fr	900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm 570 N 4000 rpm 530 N 5000 rpm
Number Of Motor Stacks	1
Rotor Inertia	3.68 kg.cm²
Number Of Motor Poles	10
Back Emf Constant	70.3 V/krpm 120 °C
Maximum Axial Force Fa	0.2 x Fr
Centring Collar Depth	3.5 mm
Second Shaft	without second shaft end
Shaft Length	40 mm
Brake Pull-In Power	12 W
Phase	three phase
Length	170.3 mm
Maximum Current Irms	11.9 A LXM32.D12N4 11.9 A LXM32.D18N4
Net Weight	4.8 kg
Centring Collar Diameter	95 mm
Stator Inductance	13.9 mH 20 °C
Motor Flange Size	100 mm
[Us] Rated Supply Voltage	480 V
Number Of Mounting Holes	4
Shaft Diameter	19 mm
Key Width	30 mm
Mounting Holes Diameter	9 mm
Type Of Cooling	natural convection
Feedback Type	single turn SinCos Hiperface
Stator Resistance	3.1 Ohm 20 °C
Range Compatibility	Lexium 32
Continuous Stall Current	3.15 A
Torque Constant	1.1 N.m/A 120 °C
Rohs Exemption Information	Yes
Mercury Free	Yes
Environmental Disclosure	ENVPEP111002EN
Sustainable Offer Status	Green Premium product
Pvc Free	Yes
Reach Regulation	Reference contains Substances of Very High Concern above the threshold
California Proposition 65	WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Weee	The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
China Rohs Regulation	X
Eu Rohs Directive	Pro-active compliance (Product out of EU RoHS legal scope)

Documents

Spec Sheet

servo motor BMH, Lexium 32, 3.3Nm, 6000rpm, keyed shaft, with brake, IP65, IP67, 128bit encoder, straight

Specifications

Documents

Royal Wholesale Electric