BCPMSCE42S - BCPM power monitoring advanced ethernet - 42 split core CT 50 A

BCPMSCE42S

BCPM power monitoring advanced + ethernet - 42 split core CT 50 A

This is an integrated solution for monitoring multi-circuits and mains by using a single meter. The meter is designed for retrofit and is used for critical power operations in data centres and energy management in buildings. It offers class 1 (1 %) power and energy system accuracy (including 50A, 100A or 200A split-core current transformers) on all branch channels. The BCPM monitors both the 42 branch circuits and mains values, incoming power and energy. All to provide information on the complete Power Distribution Unit. Adapter boards with terminals for split-core CTs can be mounted using DIN-rail, Snaptrack or on a common mounting plate with the main board Full alarming capabilities ensure that potential issues are dealt with before they become problems. Communication enabled with serial connection for either Modbus RTU or BACnet MS/TP, and an Ethernet connection for Modbus TCP, BACnet IP and SNMP. The meter need to be powered by a 100V AC to 277V AC supply source. Include 50A branch CTs with 2 meters leads and 1.8 meters round ribbon cables, for 42 split-core current transformers. The device dimensions are 353mm in width, 253mm in height, 71mm in depth and weight 1.5 kilograms.

Brand: Schneider Electric

Add to Quote Catalogue

Specifications

Network Frequency	60 Hz 50 Hz
Power Quality Analysis	voltage sag and swell detection
Variant	advanced + ethernet
Type Of Measurement	voltage current frequency active power power factor active energy
Power Monitoring	basic instrumentation
Product Or Component Type	multi-circuit energy meter
Product Name	PowerLogic BCPMSC
Range	PowerLogic
Energy Management	sub billing and cost allocation
[Us] Rated Supply Voltage	90...277 V AC 50/60 Hz +/- 1 %
Device Application	sub billing
Device Short Name	BCPMSCE
Communication Port Support	RS485 ETHERNET
Measurement Voltage	90-277 V phase to neutral 150-480 V phase to phase
Sampling Rate	256 samples/cycle
Communication Port Protocol	Modbus RTU BACnet IP BACnet MS/TP Modbus TCP SNMP v2
Communication Of Data	over voltage alarm low-low current alarm low current alarm under voltage alarm high-high current alarm high current alarm
Provided Equipment	42 x current transformer 2 x cables 2 x adapter board
Measurement Accuracy	branch current 2 % 0.25…2 A branch current 1 % 2…100 A mains current 3 % 1…100 % mains current 3 % 2…100 % voltage 1 % 90…277 V
Update Time	1.8 s
Analogue Input Type	42 split core CT 0.333 V
Rohs Exemption Information	Yes
Mercury Free	Yes
Reach Regulation	Reference contains Substances of Very High Concern above the threshold
California Proposition 65	WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Weee	The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
China Rohs Regulation	X
Eu Rohs Directive	Compliant
Height	307 mm
Standards	UL 508 EN 61010 IEC 61036 ANSI C12.1
Mounting Support	chassis
Product Certifications	UL
Net Weight	1.5 kg
Mounting Mode	fixed
Ambient Air Temperature For Storage	-40-70 °C
Relative Humidity	0-95 % 0-60 °C
Width	253 mm
Depth	71 mm
Operating Altitude	9842.52 ft (3000 m)

BCPM power monitoring advanced + ethernet - 42 split core CT 50 A

Specifications

Documents

Royal Wholesale Electric