BCPMSCE1S - 2 adapter boards - advanced ethernet - full power and energy on all circuits

BCPMSCE1S

2 adapter boards - advanced + ethernet - full power and energy on all circuits

This is an integrated solution for monitoring multi-circuits and mains by using a single meter. The meter is designed for retrofit and is used for critical power operations in data centres and energy management in buildings. It offers class 1 (1 %) power and energy system accuracy (including 50A, 100A or 200A split-core current transformers) on all branch channels. The BCPM allow the monitoring of both the branch circuits and mains values, incoming power and energy for a maximum of 42 circuits. All to provide information on the complete Power Distribution Unit. Full alarming capabilities ensure that potential issues are dealt with before they become problems. Communication enabled with serial connection for either Modbus RTU or BACnet MS/TP, and an Ethernet connection for Modbus TCP, BACnet IP and SNMP. The meter need to be powered by a 100V AC to 277V AC supply source. This version is for 42 circuits, but do not include branch current transformers nor ribbon. The device dimensions are 353mm in width, 253mm in height, 71mm in depth and weight 1.5 kilograms.

Brand: Schneider Electric

Add to Quote Catalogue

Specifications

Network Frequency	50 Hz 60 Hz
Energy Management	sub billing and cost allocation
[Us] Rated Supply Voltage	90...277 V AC 50/60 Hz +/- 1 %
Power Quality Analysis	voltage sag and swell detection
Variant	advanced + ethernet
Type Of Measurement	voltage current frequency active power power factor active energy
Power Monitoring	basic instrumentation
Product Or Component Type	multi-circuit energy meter
Product Name	PowerLogic BCPMSC
Device Application	sub billing
Device Short Name	BCPMSCE
Range	PowerLogic
Communication Port Support	RS485 ETHERNET
Measurement Accuracy	branch current 2 % 0.25…2 A branch current 1 % 2…100 A mains current 3 % 1…100 % mains current 3 % 2…100 % voltage 1 % 90…277 V
Measurement Voltage	90-277 V phase to neutral 150-480 V phase to phase
Sampling Rate	256 samples/cycle
Communication Port Protocol	Modbus RTU BACnet IP BACnet MS/TP Modbus TCP SNMP v2
Update Time	1.8 s
Analogue Input Type	42 current 0.333 V current 1 V
Communication Of Data	under voltage alarm low-low current alarm high-high current alarm high current alarm low current alarm over voltage alarm
Provided Equipment	2 x adapter board 0 x current transformer
China Rohs Regulation	X
Rohs Exemption Information	Yes
Mercury Free	Yes
Eu Rohs Directive	Compliant
Reach Regulation	Reference contains Substances of Very High Concern above the threshold
California Proposition 65	WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Weee	The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Ambient Air Temperature For Operation	0-60 °C
Height	146 mm
Mounting Mode	clip-on
Ambient Air Temperature For Storage	-40-70 °C
Relative Humidity	95-95 %
Standards	IEC 61010-1 EN 61010 ANSI C12.1
Mounting Support	board
Product Certifications	UL 508
Width	288 mm
Net Weight	1.5 kg
Operating Altitude	9842.52 ft (3000 m)

2 adapter boards - advanced + ethernet - full power and energy on all circuits

Specifications

Documents

Royal Wholesale Electric