Electrical distributor of high quality products to the LA and Orange County markets

Call Us Today To get a Quote
BCPMSCA2S – 4 adapter boards – advanced – full power and energy on all circuits
BCPMSCA2S
4 adapter boards - advanced - full power and energy on all circuits

This is an integrated solution for monitoring multi-circuits and mains by using a single meter. The meter is designed for retrofit and is used for critical power operations in data centres and energy management in buildings. It offers class 1 (1 %) power and energy system accuracy (including 50A, 100A or 200A split-core current transformers) on all branch channels. The BCPM allow the monitoring of both the branch circuits and mains values, incoming power and energy for a maximum of 84 circuits. All to provide information on the complete Power Distribution Unit. Full alarming capabilities ensure that potential issues are dealt with before they become problems. Communication enabled with a RS485 serial port and the Modbus protocol support, more communication options with the gateway H8951. The meter need to be powered by a 90V AC to 277V AC supply source. This version is for 84 circuits, but do not include branch current transformers nor ribbon. The device dimensions are 228mm in width, 146mm in height and weight 1.5 kilograms.

Brand: Schneider Electric

Add to Quote Catalogue
Specifications
Network Frequency
  • 60 Hz
  • 50 Hz
Power Quality Analysis voltage sag and swell detection
Variant advanced
Type Of Measurement
  • voltage
  • current
  • frequency
  • active power
  • power factor
  • active energy
Power Monitoring basic instrumentation
Product Or Component Type multi-circuit energy meter
Product Name PowerLogic BCPMSC
Range PowerLogic
Energy Management sub billing and cost allocation
[Us] Rated Supply Voltage 90...277 V AC 50/60 Hz +/- 1 %
Device Application sub billing
Device Short Name BCPMSCA
Warranty 18 months
Communication Port Support RS485
Measurement Voltage
  • 90-277 V phase to neutral
  • 150-480 V phase to phase
Sampling Rate 256 samples/cycle
Communication Port Protocol Modbus RTU
Communication Of Data
  • low-low current alarm
  • high current alarm
  • low current alarm
  • over voltage alarm
  • high-high current alarm
  • under voltage alarm
Provided Equipment
  • 4 x adapter board
  • 0 x current transformer
Measurement Accuracy
  • branch current 2 % 0.25…2 A
  • branch current 2 % 2…100 A
  • mains current 2 % 1…100 %
  • mains current 2 % 2…100 %
  • voltage 2 % 90…277 V
Update Time 1.8 s
Analogue Input Type
  • current 1 V
  • 84 current 0.333 V
Rohs Exemption Information Yes
Mercury Free Yes
Reach Regulation Reference contains Substances of Very High Concern above the threshold
California Proposition 65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Weee The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
China Rohs Regulation X
Eu Rohs Directive Compliant
Ambient Air Temperature For Operation 0-60 °C
Height 146 mm
Standards
  • IEC 61010-1
  • ANSI C12.1
  • EN 61010
Mounting Support board
Product Certifications UL 508
Net Weight 1.5 kg
Mounting Mode clip-on
Ambient Air Temperature For Storage -40-70 °C
Relative Humidity 95-95 %
Width 288 mm
Operating Altitude 9842.52 ft (3000 m)
Documents
Royal Wholesale Electric

5.0

Powered by

Based on 2 User Reviews