This product is part of the Lexium 28 range, an offer of servo motors from 0.05kW to 4.5kW. The servo motor features maximum mechanical speed of 3000RPM and keyed shaft end without holding brake. It is an equipped with a 20bit single-turn absolute encoder. It is a second generation servo motor with a rated supply voltage of 220V, a continuous stall current of 16.33A and a continuous power of 3000W. The shaft dimensions are 35mm (diameter) x 79mm (length). It is furnished with MIL connector for electrical connection. It is an IP50 and IP65 rated product. The length of this product is 202mm and the centering collar dimensions are 4mm (depth) x 114.3mm (diameter) with 200mm mounting hole. It weighs 18.5kg. It is suitable for machine control solutions. This range is compatible with Lexium 28 servo drives. This product is compatible with LXM26D servo drive motor at 3kW 220V three phase. It supports 180mm Asian standard flange mount with a natural convection cooling system. The Lexium 28 range offers predeterminate combinations to suit the requirements of motion control applications and optimize the performance of the installation. Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines.
Brand: Schneider Electric
Add to Quote CatalogueProduct Or Component Type | servo motor |
---|---|
Range Compatibility | Lexium 28 |
Device Short Name | BCH2 |
Circle Diameter Of The Mounting Holes | 200 mm |
Maximum Permanent Current | 18.8 A |
Continuous Power | 3000 W |
Maximum Mechanical Speed | 3000 rpm |
Product Compatibility |
|
Stator Electrical Time Constant | 20.61 ms 20 °C |
Maximum Radial Force Fr | 1200 N 2000 rpm |
Electrical Connection | connector MIL |
Mounting Support | asian standard flange |
Number Of Motor Stacks | 2 |
Rotor Inertia | 53.56 kg.cm² |
Back Emf Constant | 53 V/krpm 20 °C |
Maximum Axial Force Fa | 497 N |
Centring Collar Depth | 4 mm |
Holding Brake | without |
Shaft Length | 79 mm |
Brake Pull-In Power | 49.6 W |
Phase | three phase |
Maximum Current Irms |
|
Length | 202 mm |
Net Weight | 18.5 kg |
Centring Collar Diameter | 114.3 mm |
Stator Inductance | 2.7 mH 20 °C |
Motor Flange Size | 180 mm |
[Us] Rated Supply Voltage | 220 V |
Nominal Output Power |
|
Peak Stall Torque |
|
Number Of Mounting Holes | 4 |
Distance Shaft Shoulder-Flange | 4 mm |
Shaft Diameter | 35 mm |
Key Width | 10 mm |
Mounting Holes Diameter | 13.5 mm |
Type Of Cooling | natural convection |
Shaft End | keyed |
Nominal Speed |
|
Feedback Type | 20 bits single turn absolute encoder |
Stator Resistance | 0.131 Ohm 20 °C |
Continuous Stall Current | 16.33 A |
Nominal Torque |
|
Torque Constant | 0.88 N.m/A 20 °C |
Continuous Stall Torque |
|
Rohs Exemption Information | Yes |
Mercury Free | Yes |
Environmental Disclosure | ENVPEP1504002EN |
Sustainable Offer Status | Green Premium product |
Pvc Free | Yes |
Reach Regulation | Free of Substances of Very High Concern above the threshold |
California Proposition 65 | WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Reach Free Of Svhc | Yes |
Weee | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |
China Rohs Regulation | X |
Circularity Profile | ENVEOLI1504002EN |
Eu Rohs Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
Ambient Air Temperature For Operation | -20-40 °C |
Ip Degree Of Protection |
|
Powered by
Based on 2 User Reviews
1619 Boyd St, Santa Ana, CA 92705
(714) 835-6211
(714) 972-2366