ATV650D15N4EU - Variable speed drive, Altivar Process ATV600, ATV650, 15 kW, 400...480 V, IP55

ATV650D15N4EU

Variable speed drive, Altivar Process ATV600, ATV650, 15 kW, 400...480 V, IP55

This Altivar Process ATV600 variable speed drive can feed 3-phase synchronous and asynchronous power motors. This variable speed drive features an integrated EMC filter with 50m and 150m cable conforming to categories C2 and C3. It works at a rated supply voltage from 380V to 480VAC and it is an IP55 UL type 12 rated product. This drive provides up to 30% energy saving when on standby due to the innovative ‘‘Stop and Go’’operation without additional costs. It is suitable for motors with power rating up to 15kW/20HP for applications requiring slight overload (up to 120%). It is suitable for motors with power rating up to 11kW/15HP for applications requiring significant overload (up to 150%). Its dimensions are 264mm (width) x 330mm (depth) x 678mm (height). It weighs 19.6kg. This drive is focused on fluids management processing and energy saving, it offers extensive flexibility in water and wastewater, mining, minerals and metals, oil and gas and food and beverage applications. This product is certified by ATEX INERIS, ATEX zone 2/22, CE, UL, CSA, BV and TUV. It meets EN/IEC 61800, IEC 61000-3-12, IEC 60721-3, IEC 61508 and IEC 13849-1 standards. It is designed to be mounted in vertical position (+/- 10 °) on a wall. This new concept of drives meets the major needs of process and utilities in terms of equipment efficiency and total cost of ownership by supporting the energy management, asset management and also the overall performance of the process.

Brand: Schneider Electric

Add to Quote Catalogue

Specifications

Prospective Line Isc	50 kA
Product Destination	asynchronous motors synchronous motors
Line Current	23.3 A 480 V normal duty) 20.6 A 380 V heavy duty) 18.1 A 480 V heavy duty) 27 A 380 V normal duty)
Emc Filter	integrated 50 m EN/IEC 61800-3 category C2 integrated 150 m EN/IEC 61800-3 category C3
Asynchronous Motor Control Profile	variable torque standard optimized torque mode
Variant	with disconnect switch
Product Or Component Type	variable speed drive
Apparent Power	15 kVA 480 V heavy duty) 19.4 kVA 480 V normal duty)
Switching Frequency	4...12 kHz with derating factor 2...12 kHz adjustable
Communication Port Protocol	Ethernet Modbus TCP
Product Specific Application	process and utilities
Safety Function	STO (safe torque off) SIL 3
Maximum Horse Power Rating	15 hp heavy duty 20 hp normal duty
Supply Frequency	50...60 Hz - 5...5 %
Option Card	slot A communication module, PROFINET slot A communication module, DeviceNet slot A communication module, Modbus TCP/EtherNet/IP slot A communication module, CANopen daisy chain RJ45 slot A communication module, CANopen SUB-D 9 slot A communication module, CANopen screw terminals slot A/slot B digital and analog I/O extension module slot A/slot B output relay extension module slot A communication module, Ethernet IP/Modbus TCP/MD-Link communication module, BACnet MS/TP communication module, Ethernet Powerlink slot A communication module, Profibus DP V1
Degree Of Protection	UL type 12 UL 508C
Range Of Product	Altivar Process ATV600
Speed Drive Output Frequency	0.1-500 Hz
Ip Degree Of Protection	IP55IEC 60529 IP55IEC 61800-5-1
Motor Power Kw	11 kW heavy duty) 15 kW normal duty)
[Us] Rated Supply Voltage	380...480 V
[Us] Rated Supply Voltage	380...480 V - 15...10 %
Discrete Input Logic	16 preset speeds
Type Of Cooling	forced convection
Continuous Output Current	23.5 A 4 kHz heavy duty 31.7 A 4 kHz normal duty
Nominal Switching Frequency	4 kHz
Device Short Name	ATV650
Synchronous Motor Control Profile	synchronous reluctance motor permanent magnet motor
Discrete Input Logic	positive logic (source) DI1...DI8), < 5 V, > 11 V negative logic (sink) DI1...DI8), > 16 V, < 10 V
Analogue Output Type	software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bits software-configurable current AQ1, AQ2 0...20 mA 10 bits software-configurable current DQ-, DQ+ 30 V DC software-configurable current DQ-, DQ+ 100 mA
Discrete Output Type	relay outputs R1A, R1B, R1C 250 V AC 3000 mA relay outputs R1A, R1B, R1C 30 V DC 3000 mA relay outputs R2A, R2C 250 V AC 5000 mA relay outputs R2A, R2C 30 V DC 5000 mA relay outputs R3A, R3C 250 V AC 5000 mA relay outputs R3A, R3C 30 V DC 5000 mA
Maximum Switching Current	relay output R1, R2, R3 resistive, cos phi = 1 3 A 30 V DC relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 250 V AC relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 30 V DC relay output R1, R2, R3 resistive, cos phi = 1 3 A 250 V AC
Exchange Mode	half duplex, full duplex, autonegotiation Ethernet/Modbus TCP
Phase	3 phase
Net Weight	19.6 kg
Type Of Polarization	no impedance
Relay Output Type	configurable relay logic R2 sequence relay NO 100000 cycles configurable relay logic R3 sequence relay NO 100000 cycles configurable relay logic R1 fault relay NO/NC 100000 cycles
Frequency Resolution	analog input 0.012/50 Hz display unit 0.1 Hz
Maximum Transient Current	35.3 A 60 s heavy duty) 34.9 A 60 s normal duty)
Analogue Input Number	3
Motor Slip Compensation	not available in permanent magnet motor law adjustable automatic whatever the load
Discrete Output Number	0
Method Of Access	slave Modbus TCP
Discrete Input Number	8
Local Signalling	for embedded communication status 3 LEDs (dual colour) for communication module status 4 LEDs (dual colour) for presence of voltage 1 LED (red) for local diagnostic 3 LEDs
Linearity Error	AO1, AO2 +/- 0.2 % analog output AI1, AI2, AI3 +/- 0.15 % of maximum value analog input
Number Of Addresses	1-247 Modbus serial
Width	264 mm
Transmission Rate	10, 100 Mbits 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps
Depth	330 mm
Analogue Input Type	AI1, AI2, AI3 software-configurable voltage 0...10 V DC 31.5 kOhm 12 bits AI1, AI2, AI3 software-configurable current 0...20 mA 250 Ohm 12 bits AI2 voltage analog input - 10...10 V DC 31.5 kOhm 12 bits
Sampling Duration	5 ms +/- 1 ms DI5, DI6) - discrete input 5 ms +/- 0.1 ms AI1, AI2, AI3) - analog input 10 ms +/- 1 ms AO1) - analog output 2 ms +/- 0.5 ms DI1...DI4) - discrete input
Electrical Connection	line side screw terminal 10...16 mm² motor screw terminal 10...16 mm² control removable screw terminals 0.5...1.5 mm²
Maximum Output Frequency	500 kHz
Height	678 mm
Acceleration And Deceleration Ramps	linear adjustable separately from 0.01...9999 s
Transmission Frame	RTU
Relay Output Number	3
Data Format	8 bits, configurable odd, even or no parity
Accuracy	+/- 1 % AO1, AO2 for a temperature variation 60 °C analog output +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input
Connector Type	RJ45 on the remote graphic terminal)Modbus serial RJ45 on the remote graphic terminal)Ethernet/Modbus TCP
Input Compatibility	DI5, DI6 discrete input level 1 PLC IEC 65A-68 STOA, STOB discrete input level 1 PLC EN/IEC 61131-2 DI1...DI6 discrete input level 1 PLC EN/IEC 61131-2
Permissible Temporary Current Boost	1.5 x In 60 s heavy duty) 1.1 x In 60 s normal duty)
Mounting Mode	wall mount
Analogue Output Number	2
Physical Interface	Ethernet 2-wire RS 485
Minimum Switching Current	relay output R1, R2, R3 5 mA 24 V DC
Refresh Time	relay output R1, R2, R3)5 ms +/- 0.5 ms)
Enclosure Mounting	wall mounted
Isolation	between power and control terminals
Output Voltage	<= power supply voltage
Quantity Per Set	1
Braking To Standstill	by DC injection
Discrete Input Type	DI7, DI8 programmable as pulse input 0-30 kHz, 24 V DC <= 30 V)
Protection Type	safe torque off motor motor phase break motor thermal protection drive safe torque off drive overheating drive overcurrent between output phases and earth drive overload of output voltage drive short-circuit protection drive motor phase break drive overvoltages on the DC bus drive line supply overvoltage drive line supply undervoltage drive line supply phase loss drive overspeed drive break on the control circuit drive thermal protection motor
Supply	internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection internal supply for digital inputs and STO 24 V DC 21-27 V), <200 mA overload and short-circuit protection external supply for digital inputs 24 V DC 19-30 V), <1.25 mA overload and short-circuit protection
Mercury Free	Yes
Reach Regulation	Reference contains Substances of Very High Concern above the threshold
Weee	The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
China Rohs Regulation	X
Upgradeability	Upgraded components available
Rohs Exemption Information	Yes
Environmental Disclosure	ENVPEP1406001EN
Sustainable Offer Status	Green Premium product
California Proposition 65	WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Circularity Profile	ENVEOLI1406001EN
Eu Rohs Directive	Pro-active compliance (Product out of EU RoHS legal scope)
Product Certifications	CSA TÜV ATEX INERIS UL ATEX zone 2/22
Standards	EN/IEC 61800-3 environment 1 category C2 EN/IEC 61800-3 environment 2 category C3 EN/IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1 EN/IEC 61800-3
Insulation Resistance	> 1 MOhm 500 V DC for 1 minute to earth
Shock Resistance	15 gn 11 ms IEC 60068-2-27
Vibration Resistance	1 gn 13-200 Hz)IEC 60068-2-6 1.5 mm peak to peak 2-13 Hz)IEC 60068-2-6
Noise Level	53.7 dB 86/188/EEC
Regulation Loop	adjustable PID regulator
Operating Altitude	1000...4800 m with current derating 1 % per 100 m <= 3280.84 ft (1000 m) without derating
Overvoltage Category	III
Pollution Degree	3
Electromagnetic Compatibility	radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 electrical fast transient/burst immunity test level 4 IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 IEC 61000-4-5 conducted radio-frequency immunity test level 3 IEC 61000-4-6 electrostatic discharge immunity test level 3 IEC 61000-4-2
Ambient Air Temperature For Operation	40-50 °C with derating factor) -15-40 °C without derating)
Marking	CE
Pollution Degree	2 EN/IEC 61800-5-1
Noise Level	53.7 dB
Ambient Air Temperature For Storage	-40-70 °C
Relative Humidity	5-95 % without condensation IEC 60068-2-3
Operating Position	vertical +/- 10 degree
Maximum Thdi	<48 % from 80...100 % of load IEC 61000-3-12

Variable speed drive, Altivar Process ATV600, ATV650, 15 kW, 400...480 V, IP55

Specifications

Documents

Royal Wholesale Electric