Electrical distributor of high quality products to the LA and Orange County markets

Call Us Today To get a Quote
ATV312HU55N4412 – variable speed drive ATV312 – 5.5kW – 15kVA – 232W – 380..500 V- 3-phase supply
ATV312HU55N4412
variable speed drive ATV312 - 5.5kW - 15kVA - 232W - 380..500 V- 3-phase supply
Specifications
Product Destination asynchronous motors
Range Of Product Altivar 312 Solar
Product Or Component Type variable speed drive
Product Specific Application pumping station with photovoltaic arrays
Assembly Style with heat sink
Device Short Name ATV312
Warranty 18 months
Prospective Line Isc 1 kA
Network Frequency 47.5...63 Hz
Discrete Input Logic
  • logic input not wired LI1...LI4), < 13 V
  • negative logic (source) LI1...LI6), > 19 V
  • positive logic (source) LI1...LI6), < 5 V, > 11 V
Height 232 mm
Acceleration And Deceleration Ramps
  • linear adjustable separately from 0.1 to 999.9 s
  • S, U or customized
Line Current
  • 16.5 A 500 V
  • 21.9 A 380 V, Isc = 1 kA
Time Constant 5 ms for reference change
Electrical Connection
  • Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 terminal 2.5-2.5 mm² AWG 14
  • L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 2.5-2.5 mm² AWG 14
Standards
  • IEC 61800-3
  • IEC 61800-5-1
Speed Drive Output Frequency 0.5-500 Hz
Discrete Output Type
  • configurable relay logic R1A, R1B, R1C) 1 NO + 1 NC - 100000 cycles
  • configurable relay logic R2A, R2B) NC - 100000 cycles
Transmission Frame RTU
Asynchronous Motor Control Profile factory set: energy saving mode
Maximum Switching Current
  • 2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms R1-R2)
  • 2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms R1-R2)
  • 5 A 250 V AC resistive cos phi = 1 L/R = 0 ms R1-R2)
  • 5 A 30 V DC resistive cos phi = 1 L/R = 0 ms R1-R2)
Analogue Output Type
  • AOC configurable current 0...20 mA 800 Ohm 8 bits
  • AOV configurable voltage 0...10 V 470 Ohm 8 bits
Transient Overtorque 150-170 % of nominal motor torque
Electromagnetic Compatibility
  • 1.2/50 µs - 8/20 µs surge immunity test level 3 IEC 61000-4-5
  • electrical fast transient/burst immunity test level 4 IEC 61000-4-4
  • electrostatic discharge immunity test level 3 IEC 61000-4-2
  • radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3
Insulation Resistance >= 500 mOhm 500 V DC for 1 minute
Marking CE
Dielectric Strength
  • 2410 V DC between earth and power terminals
  • 3400 V AC between control and power terminals
Response Time
  • AOV, AOC 8 ms analog
  • R1A, R1B, R1C, R2A, R2B 8 ms discrete
Motor Power Kw 5.5 kW
Phase 3 phase
Power Dissipation In W 232 W at nominal load
Net Weight 6.5 kg
Frequency Resolution
  • analog input 0.1...100 Hz
  • display unit 0.1 Hz
Connector Type 1 RJ45 Modbus/CANopen
Switching Frequency 2...16 kHz adjustable
Maximum Transient Current 21.5 A 60 s
Number Of Drive
  • 127 CANopen
  • 31 Modbus
Analogue Input Number 3
Motor Slip Compensation
  • suppressable
  • automatic whatever the load
  • adjustable
Discrete Output Number 2
[Us] Rated Supply Voltage 380...500 V - 5...5 %
Discrete Input Type LI1...LI6) programmable 24 V, 0-100 mA PLC 3500 Ohm
Communication Port Protocol
  • CANopen
  • Modbus
Regulation Loop frequency PI regulator
Supply Voltage Limits 323-550 V
Minimum Switching Current R1-R2 10 mA 5 V DC
Analogue Output Number 2
Physical Interface RS485 multidrop serial link
Transmission Rate
  • 10, 20, 50, 125, 250, 500 kbps or 1 Mbps CANopen
  • 4800, 9600 or 19200 bps Modbus
Insulation electrical between power and control
Speed Range 1-50
Discrete Input Number 6
Local Signalling
  • for drive voltage 1 LED (red)
  • for CANopen bus status four 7-segment display units
Linearity Error +/- 0.2 % output
Number Of Addresses
  • 1-127 CANopen
  • 1-247 Modbus
Apparent Power 15 kVA
Output Voltage <= power supply voltage
Nominal Switching Frequency 4 kHz
Emc Filter integrated
Width 180 mm
Analogue Input Type
  • AI1 configurable voltage 0...10 V 30 V max 30000 Ohm
  • AI2 configurable voltage +/- 10 V 30 V max 30000 Ohm
  • AI3 configurable current 0...20 mA 250 Ohm
Braking To Standstill by DC injection
Depth 172 mm
Tightening Torque
  • Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 0.6-0.6 N.m
  • L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- 0.8-0.8 N.m
Continuous Output Current 14.3 A 4 kHz
Protection Type
  • input phase breaks drive
  • line supply overvoltage and undervoltage safety circuits drive
  • line supply phase loss safety function, for three phases supply drive
  • motor phase breaks drive
  • overcurrent between output phases and earth (on power up only) drive
  • overheating protection drive
  • short-circuit between motor phases drive
  • thermal protection motor
Maximum Horse Power Rating 7.5 hp
Supply
  • internal supply for logic inputs 19...30 V, <100 A overload and short-circuit protection
  • internal supply for reference potentiometer (2.2 to 10 kOhm) 10...10.8 V, <10 A overload and short-circuit protection
Braking Torque
  • <= 150 % 60 s with braking resistor
  • 100 % with braking resistor continuously
  • 150 % without braking resistor
Supply Frequency 50...60 Hz - 5...5 %
Option Card
  • communication card CANopen daisy chain
  • communication card DeviceNet
  • communication card Fipio
  • communication card Modbus TCP
  • communication card Profibus DP
Sampling Duration
  • AI1, AI2, AI3 8 ms analog
  • LI1...LI6 4 ms discrete
Rohs Exemption Information Yes
Mercury Free Yes
Environmental Disclosure ENVPEP110706EN
Sustainable Offer Status Green Premium product
Reach Regulation Reference contains Substances of Very High Concern above the threshold
California Proposition 65 WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Weee The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
China Rohs Regulation X
Circularity Profile ENVEOLI100203EN
Eu Rohs Directive Pro-active compliance (Product out of EU RoHS legal scope)
Pollution Degree 2
Ambient Air Temperature For Operation
  • -10-50 °C without derating with protective cover on top of the drive)
  • -10-60 °C with derating factor without protective cover on top of the drive)
Shock Resistance 15 gn 11 ms EN/IEC 60068-2-27
Vibration Resistance
  • 1 gn 13-150 Hz)EN/IEC 60068-2-6
  • 1.5 mm 3-13 Hz)EN/IEC 60068-2-6
Ambient Air Temperature For Storage -25-70 °C
Relative Humidity
  • 5-95 % without condensation IEC 60068-2-3
  • 5-95 % without dripping water IEC 60068-2-3
Ip Degree Of Protection IP20 without cover plate
Operating Altitude
  • <= 3280.84 ft (1000 m) without derating
  • >= 3280.84 ft (1000 m) with current derating 1 % per 100 m
Operating Position vertical +/- 10 degree
Protective Treatment TC
Documents
Royal Wholesale Electric

5.0

Powered by

Based on 2 User Reviews