Electrical distributor of high quality products to the LA and Orange County markets

Call Us Today To get a Quote
(714) 835-6211
sales@royalsantaana.com
Home > Schneider Electric > Automation & Control > Starters & Contactors > ATSU01N222LT – soft starter for asynchronous motor, Altistart U01, TeSys U, ATSU01, 22A, 200 to 480V, 4 to 11kW
ATSU01N222LT – soft starter for asynchronous motor, Altistart U01, TeSys U, ATSU01, 22A, 200 to 480V, 4 to 11kW
ATSU01N222LT
soft starter for asynchronous motor, Altistart U01, TeSys U, ATSU01, 22A, 200 to 480V, 4 to 11kW

The Altistart U01 is a soft start/soft stop unit for 3-phase asynchronous motors. It is designed primarily for combinations with TeSys U starter-controllers. It can be used for a motor rated power up to 11kW or 15hp for 3-phase (200V to 480V AC) and up to 22A rating. It is 45mm wide, this makes it one of the smallest soft starters on the market. It can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Its protection index is IP20. It weighs 0.49kg and its dimensions are, 45mm wide, 314mm high, 170mm deep. The Altistart U01 is designed for the following simple applications like conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It complies with standards IEC/EN 60947-4-2, and carries UL, CSA, C-Tick, and CCC certifications, and CE marking. It can be easily combined with a TeSys U controller by means of the power connector VW3G4104. It is easy to install on a DIN rail. Altistart 01 combines simplicity with easy cabling, fast configuration and efficiency. Reduced machine wear and minimized maintenance time will optimize operations. Together with TeSys Model U, it provides a unique motor starter solution.

Brand: Schneider Electric

Add to Quote Catalogue
Specifications
Current Consumption 100 mA
Product Destination asynchronous motors
Range Of Product Altistart U01 and TeSys U
Product Or Component Type soft starter
Motor Power Kw
  • 11 kW, 3 phase 400 V
  • 4 kW, 3 phase 230 V
  • 7.5 kW, 3 phase 400 V
  • 5.5 kW, 3 phase 230 V
Phase 3 phase
Power Dissipation In W
  • 2.5 W at full load and at end of starting
  • 222.5 W in transient state
Utilisation Category AC-53B EN/IEC 60947-4-2
Icl Starter Rating 22 A
Type Of Start start with voltage ramp
[Us] Rated Supply Voltage 200...480 V - 10...10 %
Product Specific Application simple machine
Maximum Horse Power Rating
  • 5 hp, 3 phase 230 V
  • 7.5 hp, 3 phase 230 V
  • 10 hp, 3 phase 460 V
  • 15 hp, 3 phase 460 V
Device Short Name ATSU01
Warranty 18 months
Electrical Connection
  • 4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit
  • screw connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit
  • screw connector - rigid 1 0.5...2.5 mm² AWG 14 control circuit
  • 4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit
  • screw connector - rigid 2 0.5...1 mm² AWG 17 control circuit
  • screw connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit
  • 4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuit
  • screw connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit
  • 4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit
  • 4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuit
Network Frequency 47.5...63 Hz
[Uc] Control Circuit Voltage 24 V DC +/- 10 %
Height 314 mm
Deceleration Time Symb adjustable from 1 to 10 s
Discrete Input Voltage 24...40 V
Maximum Switching Current
  • relay outputs 2 A 30 V DC cos phi = 0.5 20 ms inductive
  • relay outputs 2 A 250 V AC AC-15 cos phi = 0.5 20 ms inductive
Discrete Output Voltage 24 V 6...30 V) open collector logic
Marking CE
Power Range
  • 4-6 kW 200-240 V 3 phase
  • 7-11 kW 380-440 V 3 phase
Net Weight 0.49 kg
Discrete Output Current
  • 2 A DC-13
  • 3 A AC-15
Maximum Switching Voltage 440 V relay outputs
Input Output Isolation galvanic between power and control
Motor Starter Type soft starter
Function Available integrated bypass
Supply Voltage Limits 180-528 V
Starting Time
  • 1 s / 100
  • 5 s / 20
  • 10 s / 10
  • adjustable from 1 to 10 s
Minimum Switching Current 10 mA 6 V DC relay outputs
Discrete Input Type logic LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
Assembly Style with heat sink
Output Voltage <= power supply voltage
Operating Position vertical +/- 10 degree
Display Type
  • 1 LED Green)starter powered up
  • 1 LED Yellow)nominal voltage reached
Width 45 mm
Depth 170 mm
Discrete Input Logic positive LI1, LI2, BOOST < 5 V <= 0.2 mA > 13 V, >= 0.5 mA
Starting Torque 30...80 % of starting torque of motor connected directly on the line supply
Tightening Torque
  • 1.9-2.5 N.m
  • 0.5-0.5 N.m
Supply Frequency 50...60 Hz - 5...5 %
Discrete Output Type
  • open collector logic LO1 end of starting signal
  • relay outputs R1A, R1C NO
Rohs Exemption Information Yes
Mercury Free Yes
Toxic Heavy Metal Free Yes
Reach Regulation Free of Substances of Very High Concern above the threshold
California Proposition 65 WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Reach Free Of Svhc Yes
Weee The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
China Rohs Regulation X
Circularity Profile ENVEOLI100217EN
Eu Rohs Directive Pro-active compliance (Product out of EU RoHS legal scope)
Product Certifications
  • C-tick
  • CSA
  • UL
  • CCC
Standards EN/IEC 60947-4-2
Electromagnetic Compatibility
  • conducted and radiated emissions level B CISPR 11
  • immunity to radiated radio-electrical interference level 3 IEC 61000-4-3
  • voltage/current impulse level 3 IEC 61000-4-5
  • conducted and radiated emissions level 3 IEC 61000-4-6
  • immunity to conducted interference caused by radio-electrical fields IEC 61000-4-11
  • conducted and radiated emissions level B IEC 60947-4-2
  • damped oscillating waves level 3 IEC 61000-4-12
  • electrostatic discharge level 3 IEC 61000-4-2
  • EMC immunity EN 50082-1
  • EMC immunity EN 50082-2
  • harmonics IEC 1000-3-2
  • harmonics IEC 1000-3-4
  • immunity to electrical transients level 4 IEC 61000-4-4
Ambient Air Temperature For Operation
  • -10-40 °C without derating)
  • 40-50 °C with current derating of 2 % per °C)
Shock Resistance 15 gn 11 ms EN/IEC 60068-2-27
Vibration Resistance
  • 1 gn 13-150 Hz)EN/IEC 60068-2-6
  • 1.5 mm peak to peak 3-13 Hz)EN/IEC 60068-2-6
Pollution Degree 2 EN/IEC 60947-4-2
Ambient Air Temperature For Storage -25-70 °C EN/IEC 60947-4-2
Relative Humidity 5-95 % without condensation or dripping water EN/IEC 60068-2-3
Ip Degree Of Protection IP20
Operating Altitude
  • <= 3280.84 ft (1000 m) without derating
  • > 3280.84 ft (1000 m) with current derating of 2.2 % per additional 100 m
Documents
Royal Wholesale Electric

5.0

Powered by

Based on 2 User Reviews

© ROYAL WHOLESALE ELECTRIC - All Rights Reserved 2020