13373.035300 - Anaconda® Brand Type VFD-BGC Power, Shielded Round Portable w/Extensible Ground-Check, EPR/CPE - 2000 Volts

13373.035300

Flexible overall shield provides shock hazard protection
Symmetrical grounding system does not produce induced voltages when operating in a balanced three-phase system and minimizes common mode current in PWM drive systems
Enhanced ground-check conductor has longer flex life and durability
Excellent heat, moisture, steam, oil, chemical and radiation resistance
Flexible for easy handling
Resists cutting, impact, abrasion, flame and sunlight
Excellent thermal stability and physical properties over a broad temperature range
Two-layer jacket is reinforced to provide maximum protection from mechanical damage— the cause of most portable cable failures

Description	Anaconda® Brand Type VFD-BGC Power, Shielded Round Portable w/Extensible Ground-Check, EPR/CPE - 2000 Volts
Features	Flexible overall shield provides shock hazard protection Symmetrical grounding system does not produce induced voltages when operating in a balanced three-phase system and minimizes common mode current in PWM drive systems Enhanced ground-check conductor has longer flex life and durability Excellent heat, moisture, steam, oil, chemical and radiation resistance Flexible for easy handling Resists cutting, impact, abrasion, flame and sunlight Excellent thermal stability and physical properties over a broad temperature range Two-layer jacket is reinforced to provide maximum protection from mechanical damage— the cause of most portable cable failures
Applications	Designed for use as a trailing cable on AC mining equipment: From the inverter to the motor on variable frequency drive (PWM) systems Where radiated EMI is causing interference with nearby systems Where a ground-check conductor is required for fail-safe ground monitoring With wireless ground monitoring systems
Compliances	Meets flame test requirements and is accepted for listing by MSHA Approved by the Pennsylvania Department of Environmental Protection

Conductor	2 AWG thru 500 kcmil coated annealed copper, bunched wires, rope-lay-stranded per ASTM B172
Insulation	Ethylene Propylene Rubber (EPR) insulation, colored
Grounding Conductor(s):	Three coated copper, rope-lay-stranded per ASTM B172
Shield	A flexible coated copper braid shield under an aluminum tape provides protection from radiated noise and a low transfer impedance path for the high frequency components of PWM signals
Jacket	Reinforced, two-layer, extra-heavy-duty, lead-cured Chlorinated Polyethylene (CPE)
Options	Colored jackets are available Anamaxx® jacket
Jacket Marking	GENERAL CABLE® ANACONDA® BRAND (SIZE) 3/C TYPE VFD-BGC 2000 VOLTS 07-KA140006 MSHA

Catalog Number	13373.035300
No. Of Cond.	3
Cond. Size	3/0 (Awg/kmcil)
Cond. Strand	413
Nominal Insulation Thickness	0.080 (Inches) 2.0 (mm)
Ground Conductor Size	4 (AWG)
Ground-Check Cond. Size	16 (AWG)
Nominal Jacket Thickness	0.170 (Inches) 4.3 (Mm)
Nominal Cable O.D	1.93 (Inches) 49.0 (mm)
Cooper Weight	2149 (lbs/1000 Ft) 1440 (kg/km)
Net Weight	3850 (lbs/1000 ft) 5730 (kg/km)
Ampacity	279