Part Number | ATV312HU55N4412 |
---|---|
UPC | 606480508646 |
UPC11 | 60648050864 |
EAN | 3606480508646 |
Availability | N |
Lead Time | 22 |
UNSPSC | 26111503 |
HTs Code | 8504404000 |
Prop 65 | This product can expose you to chemicals including: Lead and lead compounds which is known to the State of California to cause Carcinogen & Reproductive harm. For more information go to www.p65warnings.ca.gov |
RoHS Compliant | Yes |
Discount Schedule | CP4B |
Return Indicator | No |
Depth | 6.77 inch |
Height | 9.13 inch |
Width | 7.09 inch |
Weight | 14.33 pound |
Range Of Product | Altivar 312 Solar |
---|---|
Product Or Component Type | Variable speed drive |
Product Destination | Asynchronous motors |
Product Specific Application | Pumping station with photovoltaic arrays |
Assembly Style | With heat sink |
Device Short Name | ATV312 |
Motor Power kW | 5.5 kW |
Motor Power Hp | 7.5 hp |
[Us] Rated Supply Voltage | 380...500 V - 5...5 % |
Supply Voltage Limits | 323…550 V |
Supply Frequency | 50...60 Hz - 5...5 % |
Network Frequency | 47.5...63 Hz |
Network Number Of Phases | 3 phase |
Line Current | 16.5 A 500 V 21.9 A 380 V, Isc = 1 kA |
Emc Filter | Integrated |
Apparent Power | 15 kVA |
Prospective Line Isc | 1 kA |
Continuous Output Current | 14.3 A 4 kHz |
Max Transient Current | 21.5 A 60 s |
Power Dissipation In W | 232 W at nominal load |
Speed Drive Output Frequency | 0.5…500 Hz |
Nominal Switching Frequency | 4 kHz |
Switching Frequency | 2...16 kHz adjustable |
Speed Range | 1…50 |
Transient Overtorque | 150…170 % of nominal motor torque |
Braking Torque | <= 150 % 60 s with braking resistor 100 % with braking resistor continuously 150 % without braking resistor |
Async Motor Control Profile | Factory set: energy saving mode |
Regulation Loop | Frequency PI regulator |
Motor Slip Compensation | Suppressable Automatic whatever the load Adjustable |
Output Voltage | <= power supply voltage |
Electrical Connection | Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 terminal 0.00 in² (2.5 mm²) AWG 14 L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 0.00 in² (2.5 mm²) AWG 14 |
Tightening Torque | Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 5.31 lbf.in (0.6 N.m) L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- 7.08 lbf.in (0.8 N.m) |
Insulation | Electrical between power and control |
Supply | Internal supply for logic inputs 19...30 V, <100 A overload and short-circuit protection Internal supply for reference potentiometer (2.2 to 10 kOhm) 10...10.8 V, <10 A overload and short-circuit protection |
Analogue Input Number | 3 |
Analogue Input Type | AI1 configurable voltage 0...10 V 30 V max 30000 Ohm AI2 configurable voltage +/- 10 V 30 V max 30000 Ohm AI3 configurable current 0...20 mA 250 Ohm |
Sampling Duration | AI1, AI2, AI3 8 ms analog LI1...LI6 4 ms discrete |
Response Time | AOV, AOC 8 ms analog R1A, R1B, R1C, R2A, R2B 8 ms discrete |
Linearity Error | +/- 0.2 % output |
Analogue Output Number | 2 |
Analogue Output Type | AOC configurable current 0...20 mA 800 Ohm 8 bits AOV configurable voltage 0...10 V 470 Ohm 8 bits |
Discrete Input Logic | Logic input not wired LI1...LI4), < 13 V Negative logic (source) LI1...LI6), > 19 V Positive logic (source) LI1...LI6), < 5 V, > 11 V |
Discrete Output Number | 2 |
Discrete Output Type | Configurable relay logic R1A, R1B, R1C) 1 NO + 1 NC - 100000 cycles Configurable relay logic R2A, R2B) NC - 100000 cycles |
Minimum Switching Current | R1-R2 10 mA 5 V DC |
Maximum Switching Current | 2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms R1-R2) 2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms R1-R2) 5 A 250 V AC resistive cos phi = 1 L/R = 0 ms R1-R2) 5 A 30 V DC resistive cos phi = 1 L/R = 0 ms R1-R2) |
Discrete Input Number | 6 |
Discrete Input Type | LI1...LI6) programmable 24 V, 0…100 mA PLC 3500 Ohm |
Accel And Decel Ramps | Linear adjustable separately from 0.1 to 999.9 s S, U or customized |
Braking To Standstill | By DC injection |
Powered by
Based on 2 User Reviews
1619 Boyd St, Santa Ana, CA 92705
(714) 835-6211
(714) 972-2366