| Range Of Product |
Altivar Machine ATV340 |
| Product Or Component Type |
Variable speed drive |
| Device Application |
Machine |
| Device Short Name |
ATV340 |
| Variant |
Standard version |
| Product Destination |
Asynchronous motors
Synchronous motors |
| Emc Filter |
Integrated 65.62 ft (20 m) EN/IEC 61800-3 category C3 |
| IP Degree Of Protection |
IP20IEC 61800-5-1
IP20IEC 60529 |
| Type Of Cooling |
Forced convection |
| Supply Frequency |
50...60 Hz +/- 5 % |
| Network Number Of Phases |
3 phase |
| [Us] Rated Supply Voltage |
380...480 V - 15...10 % |
| Motor Power kW |
18.5 kW normal duty
15 kW heavy duty |
| Motor Power Hp |
25 hp normal duty
20 hp heavy duty |
| Line Current |
44.9 A 380 V without line choke heavy duty)
35.7 A 480 V without line choke heavy duty)
42.4 A 380 V with external line choke normal duty)
34.1 A 480 V with external line choke normal duty)
45.5 A 380 V with external line choke heavy duty)
36.0 A 480 V with external line choke heavy duty) |
| Prospective Line Isc |
22 kA |
| Apparent Power |
28.3 kVA 480 V normal duty)
29.7 kVA 480 V heavy duty) |
| Continuous Output Current |
39 A 4 kHz normal duty
32 A 4 kHz heavy duty |
| Max Transient Current |
42.9 A 60 s normal duty)
48 A 60 s heavy duty)
52.7 A 2 s normal duty)
58 A 2 s heavy duty) |
| Async Motor Control Profile |
Optimized torque mode
Variable torque standard
Constant torque standard |
| Sync Motor Control Profile |
Reluctance motor
Permanent magnet motor |
| Speed Drive Output Frequency |
0.1…599 Hz |
| Nominal Switching Frequency |
4 kHz |
| Switching Frequency |
2...16 kHz adjustable
7...16 kHz with derating factor |
| Safety Function |
STO (safe torque off) SIL 3 |
| Number Of Preset Speeds |
16 preset speeds |
| Communication Port Protocol |
Modbus serial
Modbus TCP
Ethernet/IP |
| Option Card |
Slot GP-X digital and analog I/O extension module
Slot GP-X output relay extension module
Slot GP-ENC 5/12 V digital encoder interface module
Slot GP-ENC analog encoder interface module
Slot GP-ENC resolver encoder interface module |
| Output Voltage |
<= power supply voltage |
| Perm Temporary Current Boost |
1.1 x In 60 s normal duty)
1.35 x In 2 s normal duty)
1.5 x In 60 s heavy duty)
1.8 x In 2 s heavy duty) |
| Motor Slip Compensation |
Automatic whatever the load
Not available in permanent magnet motor law
Can be suppressed
Adjustable |
| Accel And Decel Ramps |
Linear adjustable separately from 0.01...9999 s
S, U or customized |
| Braking To Standstill |
By DC injection |
| Protection Type |
Thermal protection motor
Safe torque off motor
Motor phase loss motor
Thermal protection drive
Safe torque off drive
Overheating drive
Overcurrent drive
Output overcurrent between motor phase and earth drive
Output overcurrent between motor phases drive
Short-circuit between motor phase and earth drive
Short-circuit between motor phases drive
Motor phase loss drive
DC Bus overvoltage drive
Line supply overvoltage drive
Line supply undervoltage drive
Input supply loss drive
Exceeding limit speed drive
Break on the control circuit drive |
| Frequency Resolution |
Display unit 0.1 Hz
Analog input 0.012/50 Hz |
| Electrical Connection |
Control screw terminal 0.2...2.5 mm² AWG 24...AWG 12
Line side screw terminal 6...25 mm² AWG 8...AWG 3
DC bus screw terminal 6...25 mm² AWG 8...AWG 3
Motor screw terminal 4...25 mm² AWG 10...AWG 3 |
| Connector Type |
1 x RJ45, Modbus serial on front face
1 x RJ45, Modbus serial HMI on front face
2 x RJ45, Ethernet IP/Modbus TCP on front face |
| Physical Interface |
2-wire RS 485 Modbus serial |
| Transmission Frame |
RTU Modbus serial |
| Transmission Rate |
4800 bps, 9600 bps, 19200 bps, 38.4 Kbps Modbus serial
10/100 Mbit/s Ethernet IP/Modbus TCP |
| Exchange Mode |
Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP |
| Data Format |
8 bits, configurable odd, even or no parity Modbus serial |
| Type Of Polarization |
No impedance Modbus serial |
| Number Of Addresses |
1…247 Modbus serial |
| Method Of Access |
Slave Modbus RTU
Slave Modbus TCP |
| Supply |
External supply for digital inputs 24 V DC 19…30 V), <1.25 mA overload and short-circuit protection
Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection
Internal supply for digital inputs and STO 24 V DC 21…27 V), <200 mA overload and short-circuit protection |
| Local Signalling |
Local diagnostic 4 LED mono/dual colour)
Communication module status 4 LED dual colour) |
| Width |
7.09 in (180 mm) |
| Height |
15.16 in (385 mm) |
| Depth |
9.80 in (249 mm) |
