| Range |
TeSys |
| Product Name |
TeSys F |
| Product Or Component Type |
Contactor |
| Device Short Name |
LC1F |
| Contactor Application |
Resistive load
Motor control |
| Utilisation Category |
AC-1
AC-4
AC-3 |
| Poles Description |
3P |
| Power Pole Contact Composition |
3 NO |
| Ue Rated Operational Voltage |
<= 1000 V AC 50/60 Hz
<= 460 V DC |
| Ie Rated Operational Current |
1600 A 104 °F (40 °C)) <= 440 V AC AC-1
780 A 131 °F (55 °C)) <= 440 V AC AC-3 |
| Motor Power kW |
450 kW 1000 V AC 50/60 Hz AC-3)
400 kW 380...400 V AC 50/60 Hz AC-3)
425 kW 415 V AC 50/60 Hz AC-3)
425 kW 440 V AC 50/60 Hz AC-3)
450 kW 500 V AC 50/60 Hz AC-3)
475 kW 660...690 V AC 50/60 Hz AC-3)
220 kW 220...230 V AC 50/60 Hz AC-3)
110 kW 400 V AC 50/60 Hz AC-4) |
| Uc Control Circuit Voltage |
125 V DC |
| Coil Type |
Standard |
| Uimp Rated Imp Wstd Voltage |
8 kV |
| Overvoltage Category |
III |
| Ith Cnvtl Free Air Therm Crrt |
1600 A 104 °F (40 °C) |
| Rated Breaking Capacity |
6240 A IEC 60947-4-1 |
| Icw Rated Short-Time Wstd Crrt |
3000 A 104 °F (40 °C) - 3 min
6250 A 104 °F (40 °C) - 10 s
5600 A 104 °F (40 °C) - 30 s
4600 A 104 °F (40 °C) - 1 min
2200 A 104 °F (40 °C) - 10 min |
| Associated Fuse Rating |
1600 A gG <= 440 V
800 A aM <= 440 V |
| Average Impedance |
0.1 mOhm - Ith 1600 A 50 Hz |
| Ui Rated Insulation Voltage |
1000 V IEC 60947-4-1
1500 V VDE 0110 group C |
| Power Dissipation Per Pole |
250 W AC-1
60 W AC-3 |
| Mounting Support |
Plate |
| Standards |
IEC 60947-4-1
EN 60947-1
IEC 60947-1
EN 60947-4-1
JIS C8201-4-1 |
| Product Certifications |
LROS (Lloyds register of shipping)
RMRoS
ABS
CSA
UL
DNV
CB
BV
RINA |
| Connections - Terminals |
Control circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)flexible without cable end
Control circuit screw clamp terminals 2 0.00…0.01 in² (1…4 mm²)flexible without cable end
Control circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)flexible with cable end
Control circuit screw clamp terminals 2 0.00…0.00 in² (1…2.5 mm²)flexible with cable end
Control circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)solid without cable end
Control circuit screw clamp terminals 2 0.00…0.01 in² (1…4 mm²)solid without cable end
Power circuit bar 2 100 x 5 mm
Power circuit bolted connection |
| Tightening Torque |
Control circuit 10.62 lbf.in (1.2 N.m)
Power circuit 513.34 lbf.in (58 N.m) |
| Ctrl Circuit Voltage Limits |
Operational 0.85...1.1 Uc 131 °F (55 °C))
Drop-out 0.2...0.4 Uc 131 °F (55 °C)) |
| Inrush Power In W |
2000 W 68 °F (20 °C)) |
| Hold-In Power Consumption W |
42 W 68 °F (20 °C) |
| Heat Dissipation |
42 W |
| Operating Time |
70...80 ms closing
100...130 ms opening |
| Mechanical Durability |
5 Mcycles |
| Operating Rate |
600 cyc/h 131 °F (55 °C) |
| Compatibility Code |
LC1F |
| Motor Power Range |
250…500 kW 380…440 V 3 phase
110…220 kW 200…240 V 3 phase
250…500 kW 480…500 V 3 phase |
| Motor Starter Type |
Direct on-line contactor |
| Contactor Coil Voltage |
125 V DC standard |
| IP Degree Of Protection |
IP20 front face with shrouds IEC 60529
IP20 front face with shrouds VDE 0106 |
| Protective Treatment |
TH |
| Ambient Air Temp For Op |
23…131 °F (-5…55 °C) |
| Ambient Air Temp For Storage |
-76…176 °F (-60…80 °C) |
| Ambient Air Temp Around Device |
-40…158 °F (-40…70 °C) |
| Height |
17.09 in (434 mm) |
| Width |
27.64 in (702 mm) |
| Depth |
10.04 in (255 mm) |
| Product Weight |
87.08 lb(US) (39.5 kg) |
| Category |
22331 - CTR,F-LINE,DC,OPEN,NONREV |
| Discount Schedule |
I12 |
| GTIN |
03389118094611 |
