| Range |
TeSys |
| Product Name |
TeSys D |
| Product Or Component Type |
Contactor |
| Device Short Name |
LP1D |
| Contactor Application |
Resistive load |
| Utilisation Category |
AC-1 |
| Poles Description |
4P |
| Power Pole Contact Composition |
2 NO + 2 NC |
| Ue Rated Operational Voltage |
Power circuit <= 690 V AC 25...400 Hz
Power circuit <= 300 V DC |
| Ie Rated Operational Current |
80 A 140 °F (60 °C)) <= 440 V AC AC-1 power circuit |
| Uc Control Circuit Voltage |
12 V DC |
| Coil Type |
DC standard |
| Uimp Rated Imp Wstd Voltage |
6 kV IEC 60947 |
| Overvoltage Category |
III |
| Ith Cnvtl Free Air Therm Crrt |
80 A 140 °F (60 °C) power circuit |
| Irms Rated Making Capacity |
1000 A 440 V power circuit IEC 60947 |
| Rated Breaking Capacity |
1000 A 440 V power circuit IEC 60947 |
| Icw Rated Short-Time Wstd Crrt |
110 A 104 °F (40 °C) - 10 min power circuit
260 A 104 °F (40 °C) - 1 min power circuit
520 A 104 °F (40 °C) - 10 s power circuit
900 A 104 °F (40 °C) - 1 s power circuit |
| Associated Fuse Rating |
125 A gG <= 690 V type 1 power circuit
125 A gG <= 690 V type 2 power circuit |
| Average Impedance |
1.5 mOhm - Ith 80 A 50 Hz power circuit |
| Ui Rated Insulation Voltage |
Power circuit 690 V IEC 60947-4-1
Power circuit 600 V CSA
Power circuit 600 V UL |
| Electrical Durability |
1.4 Mcycles 80 A AC-1 <= 440 V |
| Power Dissipation Per Pole |
9.6 W AC-1 |
| Front Cover |
Without |
| Mounting Support |
Plate
Rail |
| Standards |
CSA C22.2 No 14
EN 60947-4-1
EN 60947-5-1
IEC 60947-4-1
IEC 60947-5-1
UL 508 |
| Product Certifications |
BV
CCC
CSA
DNV
EAC
GL
LROS (Lloyds register of shipping)
UL |
| Connections - Terminals |
Power circuit screw clamp terminals 1 0.00…0.05 in² (1…35 mm²)flexible without cable end
Power circuit screw clamp terminals 2 0.00…0.04 in² (1…25 mm²)flexible without cable end
Power circuit screw clamp terminals 1 0.00…0.05 in² (1…35 mm²)flexible with cable end
Power circuit screw clamp terminals 2 0.00…0.04 in² (1…25 mm²)flexible with cable end
Power circuit screw clamp terminals 1 0.00…0.05 in² (1…35 mm²)solid
Power circuit screw clamp terminals 2 0.00…0.04 in² (1…25 mm²)solid
Control circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)flexible without cable end
Control circuit screw clamp terminals 2 0.00…0.01 in² (1…4 mm²)flexible without cable end
Control circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)flexible with cable end
Control circuit screw clamp terminals 2 0.00…0.00 in² (1…2.5 mm²)flexible with cable end
Control circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)solid
Control circuit screw clamp terminals 2 0.00…0.01 in² (1…4 mm²)solid |
| Tightening Torque |
Power circuit 70.81 lbf.in (8 N.m) screw clamp terminals 0.04…0.05 in² (25…35 mm²) hexagonal 0.16 in (4 mm)
Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals flat Ø 6 mm
Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals Philips No 2
Power circuit 44.25 lbf.in (5 N.m) screw clamp terminals 0.00…0.04 in² (1…25 mm²) hexagonal 0.16 in (4 mm) |
| Operating Time |
4...19 ms opening
12...26 ms closing |
| Safety Reliability Level |
B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1
B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1 |
| Mechanical Durability |
6 Mcycles |
| Operating Rate |
3600 cyc/h 140 °F (60 °C) |
| Coil Technology |
Built-in bidirectional peak limiting diode suppressor |
| Ctrl Circuit Voltage Limits |
0.1...0.3 Uc -40…158 °F (-40…70 °C) drop-out DC
0.85...1.1 Uc -40…131 °F (-40…55 °C) operational DC
1...1.1 Uc 131…158 °F (55…70 °C) operational DC |
| Time Constant |
75 ms |
| Inrush Power In W |
22 W 68 °F (20 °C) |
| Hold-In Power Consumption W |
22 W 68 °F (20 °C) |
| Contact Compatibility |
M3 |
| Compatibility Code |
LP1D |
| IP Degree Of Protection |
IP20 front face IEC 60529 |
| Protective Treatment |
TH IEC 60068-2-30 |
| Pollution Degree |
3 |
| Ambient Air Temp For Op |
-40…140 °F (-40…60 °C)
140…158 °F (60…70 °C) with derating |
| Ambient Air Temp For Storage |
-76…176 °F (-60…80 °C) |
| Operating Altitude |
0...9842.52 ft (0...3000 m) |
| Fire Resistance |
1562 °F (850 °C) IEC 60695-2-1 |
| Flame Retardance |
V1 UL 94 |
| Mechanical Robustness |
Vibrations contactor open2 Gn, 5...300 Hz
Vibrations contactor closed4 Gn, 5...300 Hz
Shocks contactor open10 Gn for 11 ms
Shocks contactor closed15 Gn for 11 ms |
| Height |
5.00 in (127 mm) |
