| Range Of Product |
Harmony Relay |
| Product Or Component Type |
Solid state relay |
| Device Short Name |
SSD1 |
| Number Of Channels |
1 |
| Number Of Phases |
1 phase |
| Product Configuration Type |
Relay configuration |
| Mounting Support |
35 mm symmetrical DIN rail EN/IEC 60715 |
| Rated Current |
30 A |
| Contact Type |
1 NO |
| Rated Duty |
Uninterrupted |
| Output Voltage |
1...150 V DC |
| Control Circuit Voltage |
4...32 V DC |
| Tightening Torque |
1.5...1.7 N.m control input
13...15 lb.in control input
1.5...1.7 N.m load output
13...15 lb.in load output |
| Connections - Terminals |
Input screw terminals
Output screw terminals |
| Dielectric Strength |
3.75 kV AC input/output circuit
3.75 kV AC input or output to case |
| Rated Impulse Withstand Voltage |
6 kV input/output circuit
6 kV input or output to case |
| Insulation Resistance |
1000 MOhm 500 V DC |
| Local Signalling |
Control voltage LED green) |
| Pick-Up Voltage |
4 V DC turn-on |
| Drop-Out Voltage |
1 V DC turn-off |
| Input Current Range |
11…15 mA |
| Solid State Output Type |
Mosfet output |
| Solid State Switching Type |
DC switching |
| Load Current |
0.005…30 A |
| Inrush Current |
86 A 10 ms |
| Voltage Drop |
<0.535 V on-state |
| Motor Controller Rating |
0.37 kW 0.5 hp 120 V DC |
| Electromagnetic Compatibility |
Electrostatic discharge 4 kV criteria A contact discharge IEC 61000-4-2
Electrostatic discharge 4 kV criteria A air discharge IEC 61000-4-2
Conducted RF disturbances 10 V, 0.15...80 MHz criteria A level 3 IEC 61000-4-6
Electrical fast transient/burst immunity test 2 kV, 5/100 kHz criteria A output ports IEC 61000-4-4
Electrical fast transient/burst immunity test 1 kV, 5/100 kHz criteria A input ports IEC 61000-4-4
Radiated radio-frequency electromagnetic field immunity test 10 V/m, 80 MHz...1 GHz criteria A IEC 61000-4-3
Radiated radio-frequency electromagnetic field immunity test 3 V/m, 1.4...2 GHz criteria A IEC 61000-4-3
Radiated radio-frequency electromagnetic field immunity test 1 V/m, 2...2.7 GHz criteria A IEC 61000-4-3
Surge immunity test 1 kV criteria B output ports line to line IEC 61000-4-5
Surge immunity test 2 kV criteria B output ports line to earth IEC 61000-4-5
Radiated emission environment B for DC input supply IEC 60947-4-3
Conducted emission environment B for DC input supply IEC 60947-4-3 |
| Device Form Designation |
Form 5 |
| Resistance |
0.016 Ohm on-state |
| Leakage Current |
0.2 mA off-state |
| Response Time |
75 µs turn-on)
100 µs turn-off) |
| Short Circuit Protection Coordination |
Type 1
Type 2 |
| Overvoltage Category |
III |
| Width |
0.89 in (22.5 mm) |
| Height |
3.67 in (93.2 mm) |
| Depth |
4.59 in (116.5 mm) |
| Product Weight |
0.66 lb(US) (0.298 kg) |
| Device Presentation |
Complete product |
| Flammability Rating |
V-0 UL 94 |
| Vibration Resistance |
0.75 mm 10…150 Hz) EN/IEC 60068-2-6 |
| Shock Resistance |
peak acceleration EN/IEC 60068-2-27
peak acceleration EN/IEC 60068-2-27 |
| Pollution Degree |
2 |
| Standards |
IEC 61373:class B category 1
CSA C22.2 No 14-13
UL 508 |
| IP Degree Of Protection |
IP20 |
| Ambient Air Temp For Op |
-40…176 °F (-40…80 °C) |
| Ambient Air Temp For Storage |
-40…212 °F (-40…100 °C) |
| Nbr. Of Units In Pkg. |
1 |
| EU RoHs Directive |
Pro-active compliance (Product out of EU RoHS legal scope) |
| Mercury Free |
Yes |
