SH31403P01A1200
Servo motor SH3 140 27,8Nm,nokey,single,nobrake,str.conn,IP65/IP67,4k RPM
Specifications
| Part Number | SH31403P01A1200 |
|---|---|
| UNSPSC | 39121021 |
| Weight | 46.96 pound |
Characteristics
| Range Compatibility | PacDrive 3 |
|---|---|
| Product Or Component Type | Servo motor |
| Device Short Name | SH3.....P |
| Maximum Mechanical Speed | 4000 rpm |
| [Us] Rated Supply Voltage | 115...480 V |
| Network Number Of Phases | Three phase |
| Continuous Stall Current | 17.6 A |
| Continuous Stall Torque | 246.05 lbf.in (27.8 N.m) 115...480 V three phase |
| Peak Stall Torque | 798.34 lbf.in (90.2 N.m) 115...480 V three phase |
| Nominal Output Power | 1940 W 115 V three phase 3330 W 230 V three phase 4050 W 400 V three phase 3430 W 480 V three phase |
| Nominal Torque | 218.61 lbf.in (24.7 N.m) 115 V three phase 187.64 lbf.in (21.2 N.m) 230 V three phase 114.17 lbf.in (12.9 N.m) 400 V three phase 80.54 lbf.in (9.1 N.m) 480 V three phase |
| Nominal Speed | 750 rpm 115 V three phase 1500 rpm 230 V three phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase |
| Maximum Current Irms | 61 A |
| Shaft End | Smooth shaft |
| Shaft Diameter | 0.94 in (24 mm) |
| Shaft Length | 1.97 in (50 mm) |
| IP Degree Of Protection | Motor IP65 EN/IEC 60034-5 Shaft bushing IP65 EN/IEC 60034-5 Housing IP67 EN/IEC 60034-5 |
| Encoder Type | Absolute single turn SinCos Hiperface |
| Speed Feedback Resolution | 128 periods |
| Holding Brake | Without |
| Mounting Support | International standard flange |
| Motor Flange Size | 5.51 in (140 mm) |
| Torque Constant | 1.58 N.m/A 248 °F (120 °C) |
| Back Emf Constant | 105 V/krpm 68 °F (20 °C) |
| Number Of Motor Poles | 5 |
| Rotor Inertia | 17.94 kg.cm² |
| Stator Resistance | 0.4 Ohm |
| Stator Inductance | 7.72 mH |
| Maximum Radial Force Fr | 2420 N 1000 rpm 1920 N 2000 rpm 1670 N 3000 rpm |
| Maximum Axial Force Fa | 300 N |
| Type Of Cooling | Natural convection |
| Length | 12.89 in (327.5 mm) |
| Centring Collar Diameter | 5.12 in (130 mm) |
| Centring Collar Depth | 0.14 in (3.5 mm) |
| Number Of Mounting Holes | 4 |
| Mounting Holes Diameter | 0.43 in (11 mm) |
| Circle Diameter Of The Mountin | 6.50 in (165 mm) |
| Product Weight | 46.96 lb(US) (21.3 kg) |
| Warranty | 18 months |
