SH31401M11A1000
Servo motor SH3 140 11,1Nm,key,single,nobrake,str.conn,IP54/IP65,4k RPM
Specifications
| Part Number | SH31401M11A1000 |
|---|---|
| UNSPSC | 39121021 |
| Weight | 26.24 pound |
Characteristics
| Range Compatibility | PacDrive 3 |
|---|---|
| Product Or Component Type | Servo motor |
| Device Short Name | SH3.....M |
| Maximum Mechanical Speed | 4000 rpm |
| [Us] Rated Supply Voltage | 115...480 V |
| Network Number Of Phases | Three phase |
| Continuous Stall Current | 4 A |
| Continuous Stall Torque | 98.24 lbf.in (11.1 N.m) 115...480 V three phase |
| Peak Stall Torque | 238.97 lbf.in (27 N.m) 115...480 V three phase |
| Nominal Output Power | 430 W 115 V three phase 860 W 230 V three phase 1670 W 400 V three phase 1960 W 480 V three phase |
| Nominal Torque | 97.36 lbf.in (11 N.m) 115 V three phase 96.92 lbf.in (10.95 N.m) 230 V three phase 93.82 lbf.in (10.6 N.m) 400 V three phase 92.05 lbf.in (10.4 N.m) 480 V three phase |
| Nominal Speed | 375 rpm 115 V three phase 750 rpm 230 V three phase 1500 rpm 400 V three phase 1800 rpm 480 V three phase |
| Maximum Current Irms | 10.8 A |
| Shaft End | Parallel key |
| Shaft Diameter | 0.94 in (24 mm) |
| Shaft Length | 1.97 in (50 mm) |
| Key Width | 0.31 in (8 mm) |
| IP Degree Of Protection | Shaft bushing without shaft seal ring IP54 EN/IEC 60034-5 Motor IP65 EN/IEC 60034-5 Shaft bushing IP65 EN/IEC 60034-5 |
| Encoder Type | Absolute single turn SinCos Hiperface |
| Speed Feedback Resolution | 128 periods |
| Holding Brake | Without |
| Mounting Support | International standard flange |
| Motor Flange Size | 5.51 in (140 mm) |
| Torque Constant | 2.78 N.m/A 248 °F (120 °C) |
| Back Emf Constant | 193 V/krpm 68 °F (20 °C) |
| Number Of Motor Poles | 5 |
| Rotor Inertia | 7.41 kg.cm² |
| Stator Resistance | 5.3 Ohm |
| Stator Inductance | 88.55 mH |
| Maximum Radial Force Fr | 1930 N 1000 rpm 1530 N 2000 rpm 1340 N 3000 rpm |
| Maximum Axial Force Fa | 300 N |
| Type Of Cooling | Natural convection |
| Length | 8.56 in (217.5 mm) |
| Centring Collar Diameter | 5.12 in (130 mm) |
| Centring Collar Depth | 0.14 in (3.5 mm) |
| Number Of Mounting Holes | 4 |
| Mounting Holes Diameter | 0.43 in (11 mm) |
| Circle Diameter Of The Mountin | 6.50 in (165 mm) |
| Product Weight | 26.24 lb(US) (11.9 kg) |
| Warranty | 18 months |
