SH31003M12A1200
Servo motor SH3 100 8Nm,key,multi,nobrake,str.conn,IP65/IP67,6k RPM
Specifications
| Part Number | SH31003M12A1200 |
|---|---|
| UNSPSC | 39121021 |
| Weight | 16.53 pound |
Characteristics
| Range Compatibility | PacDrive 3 |
|---|---|
| Product Or Component Type | Servo motor |
| Device Short Name | SH3.....M |
| Maximum Mechanical Speed | 6000 rpm |
| [Us] Rated Supply Voltage | 115...480 V |
| Network Number Of Phases | Three phase |
| Continuous Stall Current | 3.4 A |
| Continuous Stall Torque | 70.81 lbf.in (8 N.m) 115...480 V three phase |
| Peak Stall Torque | 250.48 lbf.in (28.3 N.m) 115...480 V three phase |
| Nominal Output Power | 410 W 115 V three phase 790 W 230 V three phase 1470 W 400 V three phase 1700 W 480 V three phase |
| Nominal Torque | 69.04 lbf.in (7.8 N.m) 115 V three phase 66.38 lbf.in (7.5 N.m) 230 V three phase 61.96 lbf.in (7 N.m) 400 V three phase 59.83 lbf.in (6.76 N.m) 480 V three phase |
| Nominal Speed | 500 rpm 115 V three phase 1000 rpm 230 V three phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase |
| Maximum Current Irms | 14.7 A |
| Shaft End | Parallel key |
| Shaft Diameter | 0.75 in (19 mm) |
| Shaft Length | 1.57 in (40 mm) |
| Key Width | 0.24 in (6 mm) |
| IP Degree Of Protection | Motor IP65 EN/IEC 60034-5 Shaft bushing IP65 EN/IEC 60034-5 Housing IP67 EN/IEC 60034-5 |
| Encoder Type | Absolute multiturn SinCos Hiperface |
| Speed Feedback Resolution | 128 periods |
| Holding Brake | Without |
| Mounting Support | International standard flange |
| Motor Flange Size | 3.94 in (100 mm) |
| Torque Constant | 1.22 N.m/A 248 °F (120 °C) |
| Back Emf Constant | 148 V/krpm 68 °F (20 °C) |
| Number Of Motor Poles | 4 |
| Rotor Inertia | 3.22 kg.cm² |
| Stator Resistance | 5.3 Ohm |
| Stator Inductance | 49.8 mH |
| Maximum Radial Force Fr | 1050 N 1000 rpm 830 N 2000 rpm 730 N 3000 rpm 660 N 4000 rpm |
| Maximum Axial Force Fa | 160 N |
| Type Of Cooling | Natural convection |
| Length | 9.47 in (240.5 mm) |
| Centring Collar Diameter | 3.74 in (95 mm) |
| Centring Collar Depth | 0.14 in (3.5 mm) |
| Number Of Mounting Holes | 4 |
| Mounting Holes Diameter | 0.35 in (9 mm) |
| Circle Diameter Of The Mountin | 4.53 in (115 mm) |
| Product Weight | 16.53 lb(US) (7.5 kg) |
| Warranty | 18 months |
