Part Number | SH30702M02F2000 |
---|---|
UNSPSC | 39121021 |
Weight | 6.61 pound |
Range Compatibility | PacDrive 3 |
---|---|
Product Or Component Type | Servo motor |
Device Short Name | SH3.....M |
Maximum Mechanical Speed | 8000 rpm |
[Us] Rated Supply Voltage | 115...480 V |
Network Number Of Phases | Three phase |
Continuous Stall Current | 1.5 A |
Continuous Stall Torque | 19.47 lbf.in (2.2 N.m) 115...480 V three phase |
Peak Stall Torque | 67.27 lbf.in (7.6 N.m) 115...480 V three phase |
Nominal Output Power | 700 W 115 V three phase 340 W 230 V three phase 660 W 400 V three phase 780 W 480 V three phase |
Nominal Torque | 19.47 lbf.in (2.2 N.m) 115 V three phase 19.03 lbf.in (2.15 N.m) 230 V three phase 18.59 lbf.in (2.1 N.m) 400 V three phase 18.32 lbf.in (2.07 N.m) 480 V three phase |
Nominal Speed | 750 rpm 115 V three phase 1500 rpm 230 V three phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase |
Maximum Current Irms | 6 A |
Shaft End | Smooth shaft |
Shaft Diameter | 0.43 in (11 mm) |
Shaft Length | 0.91 in (23 mm) |
Key Width | 0.16 in (4 mm) |
IP Degree Of Protection | Shaft bushing without shaft seal ring IP54 EN/IEC 60034-5 Motor IP65 EN/IEC 60034-5 Shaft bushing IP65 EN/IEC 60034-5 |
Encoder Type | Absolute multiturn SinCos Hiperface |
Speed Feedback Resolution | 128 periods |
Holding Brake | With |
Holding Torque | 17.70 lbf.in (2 N.m) |
Mounting Support | International standard flange |
Motor Flange Size | 2.76 in (70 mm) |
Torque Constant | 1.47 N.m/A 248 °F (120 °C) |
Back Emf Constant | 95.9 V/krpm 68 °F (20 °C) |
Number Of Motor Poles | 3 |
Rotor Inertia | 0.482 kg.cm² |
Stator Resistance | 16.4 Ohm |
Stator Inductance | 115.7 mH |
Maximum Radial Force Fr | 710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm |
Maximum Axial Force Fa | 80 N |
Type Of Cooling | Natural convection |
Length | 8.37 in (212.5 mm) |
Centring Collar Diameter | 2.36 in (60 mm) |
Centring Collar Depth | 0.10 in (2.5 mm) |
Number Of Mounting Holes | 4 |
Mounting Holes Diameter | 0.22 in (5.5 mm) |
Circle Diameter Of The Mountin | 3.23 in (82 mm) |
Product Weight | 6.61 lb(US) (3 kg) |
Warranty | 18 months |
Powered by
Based on 2 User Reviews
1619 Boyd St, Santa Ana, CA 92705
(714) 835-6211
(714) 972-2366