| Range Compatibility |
Lexium 28 |
| Product Or Component Type |
Servo motor |
| Device Short Name |
BCH2 |
| Maximum Mechanical Speed |
3000 rpm |
| [Us] Rated Supply Voltage |
220 V |
| Network Number Of Phases |
Single phase
Three phase |
| Continuous Stall Current |
6.18 A |
| Continuous Stall Torque |
63.37 lbf.in (7.16 N.m) LXM26D 7 A, 220 V, single phase
63.37 lbf.in (7.16 N.m) LXM26D 7 A, 220 V, three phase
63.37 lbf.in (7.16 N.m) LXM28... 7 A, 220 V, single phase
63.37 lbf.in (7.16 N.m) LXM28... 7 A, 220 V, three phase |
| Continuous Power |
1500 W |
| Peak Stall Torque |
190.11 lbf.in (21.48 N.m) LXM26D 7 A, 220 V, single phase
190.11 lbf.in (21.48 N.m) LXM26D 7 A, 220 V, three phase
190.11 lbf.in (21.48 N.m) LXM28... 7 A, 220 V, single phase
190.11 lbf.in (21.48 N.m) LXM28... 7 A, 220 V, three phase |
| Nominal Output Power |
1500 W LXM26D 7 A, 220 V, single phase
1500 W LXM26D 7 A, 220 V, three phase
1500 W LXM28... 7 A, 220 V, single phase
1500 W LXM28... 7 A, 220 V, three phase |
| Nominal Torque |
63.37 lbf.in (7.16 N.m) LXM26D 7 A, 220 V, single phase
63.37 lbf.in (7.16 N.m) LXM26D 7 A, 220 V, three phase
63.37 lbf.in (7.16 N.m) LXM28... 7 A, 220 V, single phase
63.37 lbf.in (7.16 N.m) LXM28... 7 A, 220 V, three phase |
| Nominal Speed |
2000 rpm LXM26D 7 A, 220 V, single phase
2000 rpm LXM26D 7 A, 220 V, three phase
2000 rpm LXM28... 7 A, 220 V, single phase
2000 rpm LXM28... 7 A, 220 V, three phase |
| Maximum Current Irms |
20.31 A LXM28... 1.5 kW, 220 V |
| Maximum Permanent Current |
6.74 A |
| Product Compatibility |
LXM26D servo drive 1.5 kW, 220 V, single phase
LXM26D servo drive 1.5 kW, 220 V, three phase
LXM28... servo drive 1.5 kW, 220 V, single phase
LXM28... servo drive 1.5 kW, 220 V, three phase |
| Shaft End |
Keyed |
| Shaft Diameter |
0.87 in (22 mm) |
| Shaft Length |
2.17 in (55 mm) |
| Key Width |
0.31 in (8 mm) |
| Feedback Type |
20 bits single turn absolute encoder |
| Holding Brake |
With |
| Holding Torque |
84.97 lbf.in (9.6 N.m) built-in |
| Mounting Support |
Asian standard flange |
| Motor Flange Size |
5.12 in (130 mm) |
| Electrical Connection |
Connector MIL |
| Torque Constant |
1.16 N.m/A 68 °F (20 °C) |
| Back Emf Constant |
70 V/krpm 68 °F (20 °C) |
| Rotor Inertia |
10 kg.cm² |
| Stator Resistance |
0.64 Ohm 68 °F (20 °C) |
| Stator Inductance |
6.4 mH 68 °F (20 °C) |
| Stator Electrical Time Const |
10 ms 68 °F (20 °C) |
| Maximum Radial Force Fr |
670 N 2000 rpm |
| Maximum Axial Force Fa |
200 N |
| Brake Pull-In Power |
19.7 W |
| Type Of Cooling |
Natural convection |
| Length |
7.95 in (202 mm) |
| Number Of Motor Stacks |
3 |
| Centring Collar Diameter |
4.33 in (110 mm) |
| Centring Collar Depth |
0.31 in (8 mm) |
| Number Of Mounting Holes |
4 |
| Mounting Holes Diameter |
0.36 in (9.2 mm) |
| Circle Diameter Of The Mountin |
5.71 in (145 mm) |
| Distance Shaft Shoulder-Flange |
0.31 in (8 mm) |
| Product Weight |
19.40 lb(US) (8.8 kg) |
| IP Degree Of Protection |
IP50 IM V3
IP65 IM B5, IM V1 |
| Ambient Air Temp For Op |
32…104 °F (0…40 °C) |
| Category |
22000 - Temporary Category for ITS Price Promotion |
| Discount Schedule |
I |
| GTIN |
00785901829447 |
