Rotation monitoring hazardous area – M30 – Sn10mm – 6..150c/mn – NC – cable 2m
This sensor is dedicated to rotation monitoring in hazardous areas. It complies with the 2014/34/EU – ATEX directive. It provides an economical solution for detecting slip, belt breakage, drive shaft shear and overloading. Dedicated to rotation monitoring, it is suitable for conveyor belts, bucket elevators and Archemedian screws. And also for grinders, crushers, pumps, centrifugal driers, mixers, etc. This product is a cylindrical sensor, flush mountable in metal, diameter 30mm, threaded M30 x 1.5. It features a cylindrical metal case and a 2m long cable. It has a sensing distance of 10mm. Its adjustable frequency range is 6 impluses/min to 150 impluses/min. Three-wire, DC supply, 12V to 48V, NC function, PNP solid-state output.
Brand: Telemecanique
Add to Quote CatalogueSpecifications
| Part Number | XSAV11373EX |
|---|---|
| Country of Origin | FR |
| UPC | 389110955491 |
| UPC11 | 38911095549 |
| EAN | 3389110955491 |
| Availability | N |
| Lead Time | 27 |
| UNSPSC | 39121550 |
| HTs Code | 8536507000 |
| Prop 65 | This product can expose you to chemicals including: Di-isodecyl phthalate (DIDP) and Diisononyl phthalate (DINP) which is known to the State of California to cause Carcinogen and Reproductive harm. For more information go to www.p65warnings.ca.gov |
| RoHS Compliant | Yes |
| Discount Schedule | DS2 |
| Return Indicator | No |
| Height | 1.18 inch |
Characteristics
| Range Of Product | OsiSense XS ATEX D |
|---|---|
| Series Name | Application |
| Sensor Type | Inductive proximity sensor |
| Device Application | Rotation monitoring ATEX dust |
| Sensor Name | XSA |
| Sensor Design | Cylindrical M30 |
| Size | 81 mm |
| Body Type | Fixed |
| Flush Mountability | Flush mountable |
| Material | Metal |
| Enclosure Material | Nickel plated brass |
| Sn Nominal Sensing Distance | 0.39 in (10 mm) |
| Type Of Output Signal | Discrete |
| Wiring Techniquees | 3-wire |
| Discrete Output Function | 1 NC |
| Output Circuit Type | DC |
| Discrete Output Type | PNP |
| Electrical Connection | Cable |
| Cable Length | 6.56 ft (2 m) |
| Us Rated Supply Voltage | 12...48 V DC reverse polarity protection |
| Switching Capacity In Ma | <= 200 mA overload and short-circuit protection |
| IP Degree Of Protection | IP67 IEC 60529 |
| Thread Type | M30 x 1.5 |
| Detection Face | Frontal |
| Front Material | PPS |
| Sensing Range | > 0.31...0.59 in (> 8...15 mm) |
| Adjustable Frequency Range | 6…150 cyc/mn |
| Operating Zone | 0.00…0.31 in (0…8 mm) |
| Differential Travel | 3...15% of Fr |
| Repeat Accuracy | 3% of Sr |
| Cable Composition | 3 x 0.34 mm² |
| Wire Insulation Material | PvR |
| Status Led | Output state 1 LED red) |
| Supply Voltage Limits | 10…58 V DC |
| Switching Frequency | <= 100 Hz |
| Voltage Drop | <1.8 V closed state) |
| Current Consumption | 0...15 mA no-load |
| Run-Up Delay At Power-Up | 9 s standard |
| Marking | II2 D-Ex tb IIIC T90°C Db IP67 |
| Threaded Length | 2.24 in (57 mm) |
| Height | 1.18 in (30 mm) |
| Length | 3.19 in (81 mm) |
| Environmental Characteristic | Hazardous location |
| Standards | EN/IEC 60079-31 EN/IEC 60079-0 |
| Directives | 2014/34/EU - ATEX directive |
| Product Certifications | INERIS 04ATEX0022X IEC-Ex INE 17.0006 |
| Ambient Air Temp For Op | -4…140 °F (-20…60 °C) |
| Dust Zone | Zone 21 - 22 |
| Category | 22486 - SENSORS, PROXIMITY |
| Discount Schedule | DS2 |
