Part Number | LXM28AU45M3X |
---|---|
Country of Origin | CN |
UPC | 785901980544 |
UPC11 | 78590198054 |
EAN | 3606480711848 |
Availability | N |
Lead Time | 92 |
UNSPSC | 39121021 |
ECCN | 3A225 |
HTs Code | 8504404000 |
Prop 65 | This product can expose you to chemicals including: Lead and lead compounds which is known to the State of California to cause Carcinogen & Reproductive harm. For more information go to www.p65warnings.ca.gov |
RoHS Compliant | Yes |
Discount Schedule | PC51 |
Return Indicator | No |
Depth | 7.32 inch |
Height | 9.21 inch |
Width | 4.57 inch |
Weight | 7.05 pound |
Range Of Product | Lexium 28 |
---|---|
Product Or Component Type | Motion servo drive |
Device Short Name | LXM28A |
Format Of The Drive | Compact housing |
Line Current | 17.9 A 147.1 % 220 V, three phase |
Network Number Of Phases | Three phase |
[Us] Rated Supply Voltage | 220 V - 10...15 %)three phase |
Supply Voltage Limits | 200…255 V three phase |
Supply Frequency | 50/60 Hz - 5...5 % |
Network Frequency | 47.5...63 Hz |
Emc Filter | Without EMC filter |
Continuous Output Current | 22.9 A 8 kHz |
Output Current 3S Peak | 61 A 220 V |
Continuous Power | 4500 W 220 V |
Nominal Power | 4.5 kW 220 V 8 kHz |
Switching Frequency | 8 kHz |
Overvoltage Category | III |
Leakage Current | 1.55 mA |
Output Voltage | <= power supply voltage |
Electrical ISOlation | Between power and control |
Type Of Cable | Shielded motor cable 32…131 °F (0…55 °C)) copper |
Electrical Connection | Spring terminal 6 mm², AWG 10 L1-L2) Spring terminal 6 mm², AWG 10 R, S, T) Spring terminal 6 mm², AWG 10 U, V, W, PE) Spring terminal 6 mm², AWG 10 PA/+, PBe) |
Discrete Input Number | 8 programmable CN1) 1 pulse train input (PTI) CN1) 2 fast capture CN1) 1 safety function STO CN9) |
Discrete Input Voltage | 24 V DC logic |
Discrete Input Logic | Positive or negative CN1) |
Discrete Output Number | 5 logic output CN1)12...24 V DC 1 pulse train output (PTO) CN1) |
Discrete Output Voltage | 12...24 V DC |
Discrete Output Logic | Positive or negative CN1) |
Analogue Input Number | 2 |
Absolute Accuracy Error | 0.1 % |
Analogue Input Type | V_REF voltage analog input - 10...10 V 10 kOhm 14 bits T_REF voltage analog input |
Control Signal Type | Servo motor encoder feedback CN2 |
Protection Type | Against reverse polarity inputs signal Against short-circuits outputs signal Overcurrent motor Overvoltage motor Undervoltage motor Overheating motor Overload motor Overspeed motor |
Safety Function | STO (safe torque off), Integrated |
Safety Level | SIL 2 IEC 61800-5-2 2007 SIL 2 IEC 61508-1 2010 PL d/category 3 EN/ISO 13849-1 2008 SIL 2 EN/ISO 13849-1 2009/AC SIL 2 EN 60204-1 2006 SIL 2 EN 60204-1 2009/A1 SIL 2 EN 60204-1 2010/AC SIL 2 IEC 62061 2012 |
Communication Interface | CANopen, Integrated CANmotion, Integrated |
Connector Type | RJ45 CN4)CANopen, CANmotion |
Method Of Access | Slave |
Transmission Rate | 250 kbit/s 328.08…820.21 ft (100…250 m) CANopen, CANmotion 500 kbit/s 13.12…328.08 ft (4…100 m) CANopen, CANmotion 1 Mbit/s 13.12 ft (4 m) CANopen, CANmotion |
Number Of Addresses | 1…127 CANopen, CANmotion |
Physical Interface | RS485 Modbus Serial line slave |
Status Led | Charge 1 LED Red) RUN 1 LED Green) Error 1 LED Red) |
Signalling Function | Servo status and fault codes five 7-segment display units |
Marking | CULus CSA CE |
Type Of Cooling | Integrated fan |
Operating Position | Vertical |
Product Compatibility | Servo motor BCH2 7.09 in (180 mm), 3 4500 W Servo motor BCH2 7.09 in (180 mm), 2 3500 W |
Width | 4.57 in (116 mm) |
Height | 9.21 in (234 mm) |
Depth | 7.32 in (186 mm) |
Powered by
Based on 2 User Reviews
1619 Boyd St, Santa Ana, CA 92705
(714) 835-6211
(714) 972-2366