| Range Of Product |
Lexium SD3 |
| Product Or Component Type |
Motion stepper drive |
| Device Short Name |
SD326 |
| Supply Voltage Limits |
200…240 V
100…120 V |
| Format Of The Drive |
Block |
| Network Number Of Phases |
Single phase |
| Us Rated Supply Voltage |
100...120 V - 15...10 %
200...230 V - 15...10 % |
| Supply Voltage Type |
AC/DC |
| Network Frequency Limits |
50…60 Hz - 15...10 %) |
| Communication Interface |
Pulse/direction, Integrated |
| Function Available |
Rotation monitoring
Holding brake monitoring |
| Motor Phase Current |
2.5 A |
| Current Consumption |
<= 0.2 mA 24 V control voltage |
| Nominal Power |
180 W 115 V
270 W 230 V |
| Short-Circuit Current |
0.5 kA |
| Associated Fuse Rating |
6 A 115 V
6 A 230 V |
| Overvoltage Category |
III |
| Inrush Current |
60 A |
| Leakage Current |
30 mA IEC 60990-3 |
| Voltage State 0 Guaranteed |
<= 5 V 24 V optocoupler input signals
<= 0.5 V 5 V optocoupler input signals |
| Voltage State 1 Guaranteed |
15...30 V 24 V optocoupler input signals
2.5...5.25 V 5 V optocoupler input signals |
| Input Current |
25 mA 5 V optocoupler input signals
7 mA 24 V optocoupler input signals |
| Input Frequency |
200 kHz 24 V optocoupler input signals
200 kHz 5 V optocoupler input signals
400 kHz ENC_A/ENC_B signal input |
| Maximum Switching Voltage |
30 V DC readiness signal output) |
| Maximum Switching Current |
200 mA readiness signal output)
50 mA 24 V output signals)RM-FAULT_OUT
1.7 mA 24 V output signals)+BRAKE_OUT |
| Voltage Drop |
<1 V 50 mA load 24 V output signals
<1 V 50 mA load ENC+5V_OUT signal output
<1 V 50 mA load readiness signal output |
| Physical Interface |
RS422 - ENC_A/ENC_B signal input |
| Output Voltage |
<= 30 V 24 V output signals)
4.75...5.25 V ENC+5V_OUT signal output) |
| Input Voltage |
24 V -15 %/+20 % 24 V control voltage |
| Residual Ripple |
<= 5 % 24 V control voltage) |
| Type Of Cooling |
Natural convection |
| Maximum Mechanical Speed |
3000 rpm |
| Height |
5.71 in (145 mm) |
| Width |
2.83 in (72 mm) |
| Depth |
5.51 in (140 mm) |
| Shock Resistance |
15 gn 11 ms EN/IEC 60068-2-27 |
| Product Weight |
2.43 lb(US) (1.1 kg) |
| Electromagnetic Compatibility |
Electrostatic discharge level 3 EN/IEC 61000-4-2
Immunity to electrical transients level 4 EN/IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 EN/IEC 61000-4-3
Voltage/current impulse level 3 EN/IEC 61000-4-5 |
| Standards |
EN/IEC 61800-5-1
EN/IEC 61800-3
EN/IEC 61800-3 environment 2
EN/IEC 61800-3 environment 1
EN/IEC 50178 |
| Product Certifications |
UL
CUL |
| Marking |
CE |
| Ambient Air Temp For Op |
32…104 °F (0…40 °C) UL
32…122 °F (0…50 °C) |
| Ambient Air Temp For Storage |
-13…158 °F (-25…70 °C) |
| Pollution Degree |
Level 2 |
| Relative Humidity |
5…85 % without condensation |
| Operating Altitude |
<= 3280.84 ft (1000 m) without derating
> 3280.84...< 6561.68 ft (> 1000...< 2000 m) without derating maximum ambient temperature 40°C, no protective film, lateral distance of > 50mm) |
| Vibration Resistance |
1 gn 13…150 Hz)EN/IEC 60068-2-6
1.5 mm 3…13 Hz)EN/IEC 60068-2-6 |
| IP Degree Of Protection |
IP20
On upper part IP40 without removal of protective film) |
| Category |
18285 - STEPPER DRIVES |
| Discount Schedule |
PC55 |
