This is an integrated solution for monitoring multi-circuits and mains by using a single meter. The meter is designed for retrofit and is used for critical power operations in data centres and energy management in buildings. It offers class 1 (1 %) power and energy system accuracy (including 50A, 100A or 200A split-core current transformers) on all branch channels. The BCPM allow the monitoring of both the branch circuits and mains values, incoming power and energy for a maximum of 42 circuits. All to provide information on the complete Power Distribution Unit. Full alarming capabilities ensure that potential issues are dealt with before they become problems. Communication enabled with a RS485 serial port and the Modbus protocol support, more communication options with the gateway H8951. The meter need to be powered by a 90V AC to 277V AC supply source. This version is for 42 circuits, but do not include branch current transformers nor ribbon. The device dimensions are 228mm in width, 146mm in height and weight 1.5 kilograms.
Brand: Veris Industries
Add to Quote CataloguePart Number | BCPMSCA1S |
---|---|
UPC | 606480344107 |
UPC11 | 60648034410 |
EAN | 3606480344107 |
Availability | N |
Lead Time | 15 |
UNSPSC | 40151552 |
Prop 65 | This product can expose you to chemicals including: Lead and lead compounds which is known to the State of California to cause Carcinogen & Reproductive harm. For more information go to www.p65warnings.ca.gov |
Discount Schedule | PL1 |
Return Indicator | No |
Height | 5.75 inch |
Width | 11.34 inch |
Weight | 3.31 pound |
Range | PowerLogic |
---|---|
Product Name | PowerLogic BCPMSC |
Product Or Component Type | Multi-circuit energy meter |
Device Short Name | BCPMSCA |
Model Type | Advanced |
Power Monitoring | Basic instrumentation |
Energy Management | Sub billing and cost allocation |
Device Application | Sub billing |
Power Quality Analysis | voltage sag and swell detection |
Type Of Measurement | Voltage Current Frequency Active power Power factor Active energy |
[Us] Rated Supply Voltage | 90...277 V AC 50/60 Hz +/- 1 % |
Network Frequency | 50 Hz 60 Hz |
Current Transformer Input | 42 current 0.333 V current 1 V |
Update Time | 1.8 s |
Measurement Voltage | 90…277 V phase to neutral 150…480 V phase to phase |
Measurement Accuracy | Branch current 2 % 0.25…2 A Branch current 1 % 2…100 A Mains current 3 % 1…100 % Mains current 3 % 2…100 % Voltage 1 % 90…277 V |
Sampling Rate | 256 samples/cycle |
Provided Equipment | 2 x adapter board 0 x current transformer |
Communication Port Protocol | Modbus RTU |
Communication Port Support | RS485 |
Communication Of Data | High current alarm High-high current alarm Low current alarm Over voltage alarm Low-low current alarm Under voltage alarm |
Mounting Mode | Clip-on |
Mounting Support | Board |
Relative Humidity | 95 % |
Ambient Air Temp For Op | 32…140 °F (0…60 °C) |
Ambient Air Temp For Storage | -40…158 °F (-40…70 °C) |
Operating Altitude | 9842.52 ft (3000 m) |
Standards | EN 61010 ANSI C12.1 IEC 61010-1 |
Product Certifications | UL 508 |
Width | 11.34 in (288 mm) |
Height | 5.75 in (146 mm) |
Product Weight | 3.31 lb(US) (1.5 kg) |
Category | 09793 - PLOGIC BRANCH CIRCUIT BCPM & MCM |
Discount Schedule | PL1 |
GTIN | 03606480344107 |
Nbr. Of Units In Pkg. | 1 |
EU RoHs Directive | Compliant |
WEEE | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |
Warranty | 18 months |
Powered by
Based on 2 User Reviews
1619 Boyd St, Santa Ana, CA 92705
(714) 835-6211
(714) 972-2366