PV1080 - Ventilated Front/Rear Plinths, PV, 3.94×31.42×2.44, Mild Steel

PV1080

Ventilated Front/Rear Plinths, PV, 3.94×31.42×2.44, Mild Steel

Front and rear plinth sections with ventilated panels. Recommended to be used in combination with the ventilated bottom plate CVB. For cabling without any restrictions and in accordance with the VDE 0113 standard. The plinth consists of four corner pieces with removable front covers. All panels have double returns for added strength. Only available in height of 100 mm.

Brand: nVent HOFFMAN

Add to Quote

Specifications

Catalog Number	PV1080
GTIN	00783510526740
ETIM7	EC000721
UNSPSC-IGCC	39121334-4492
Brand	nVent HOFFMAN
Features & Benefits	The front and rear plinth allows for cabling without any restrictions in accordance with the VDE 0113 standard. Installing cables is made easy as the plinth creates extra space underneath the enclosure. The ventilation louvres allows for natural ventilation into this area underneath the enclosure. Feature: painted steel plinth with front and rear ventilated removable panels for mild steel floor standing enclosures Advantage: the plinth is mounted underneath the enclosure to provide extra space between the installation floor and the enclosure's bottom plates, this space is accessible by removing the front or rear panel; the ventilation louvres pre-machined into the panels allow natural ventilation Benefit: installing cables into the enclosure can be done easily as the plinth creates extra space below the enclosure; this extra space allows the installer to route the cables through the plinths for bayed enclosures; the plinth allows enclosures to be fixed to the floor without the need for interior access; the ventilation louvres allows air to enter into the bottom of the enclosure Comment: the front and rear plinth PV, must be mounted along with side panels PS; if creating an enclosure system with multiple enclosures then the side panels are required to be mounted at the beginning and end only; to reinforce the combined plinths, plinth combining profiles PCP/PCPK, should be used Mounting requirements: add the side panels PS for a complete plinth; when combining enclosures it is recommended to add transversal panels PCP for cable duct support and extra rigidity; use ventilated bottom plates CVB to get better enclosure ventilation

Product Attributes

Country of Origin	MX
Height (H)	3.94 in
Height (H)	100 mm
Width (W)	31.42 in
Width (W)	798 mm
Depth (D)	2.44 in
Depth (D)	62 mm
Material	Mild Steel
Finish	Powder Coated
Color	Umbra Gray
Color Code	RAL 7022
Thickness (T)	16
Thickness (T)	1.5 mm
Package Quantity	2

Documents

Spec Sheet (pdf)

Ventilated Front/Rear Plinths, PV, 3.94×31.42×2.44, Mild Steel

Specifications

Product Attributes

Documents

Royal Wholesale Electric