P2RA19S12 - ProLine G2 19-Inch Rack Angles, Sq Hole, 1200mm, Conductive, Steel

P2RA19S12

ProLine G2 19-Inch Rack Angles, Sq Hole, 1200mm, Conductive, Steel

The ProLine G2 Rack Angles mount using BV-M6 fasteners instead of the traditional cage nut and screw combination. The Rack Angle height and rack unit count are optimized for the ProLine G2 frame heights. Rack Angles have two mounting surfaces that function in the attachment of rack-mount equipment and accessories. Rack Angles comply with AN SI/EIA RS-310-D rack mounting standards.

Brand: nVent HOFFMAN

Add to Quote

Specifications

Catalog Number	P2RA19S12
GTIN	00783510326067
Tariff Number	8302423065
Bulletin Code	P40
Brand	nVent HOFFMAN
Features & Benefits	Furnished in pairs Can be mounted directly to the frame, or at variable depths using Adjustable Rack-Mounting Rails or Grid Straps; when mounted to the frame there is 44mm between the door opening and the Rack Angle mounting surface Single-bay Frames: in a 600-mm wide frame, Rack Angles can be mounted in-line with the frame; in an 800-mm wide frame, Adjustable Rack-Mounting Rails or Frame Reducing Brackets are required (sold separately) to achieve the 19-inch rack spacing Double-Bay Frames: in a 1200-mm wide frame, Center Uprights must be used to create a mounting surface in the center of the enclosure for either bay; in a 1600-mm frame, Center Uprights are again required in addition to Frame Reducing Brackets or Adjustable Rack-Mounting Rails to achieve the 19-inch rack spacing Tapped-Hole Rack Angles accommodate 10-32 screws for equipment mounting Square-Hole Rack Angles accept both metric and English cage nuts and screws: most commonly M5, M6, and 10-32 screws Optional Shelves, Drawers, and Guides require two sets of Rack Angles to secure within the frame All mounting hardware for Rack Angle installation into the frame is included; mounting hardware for securing rack-mount equipment/accessories to the Rack Angles is either supplied with the item or purchased separately Tapped Rack Angles are constructed from 12 gauge (2.5 mm) conductive steel, while Square-Hole Rack Angles are from 14 gauge (1.75 mm) conductive steel Load rating of 20 lbs (9.1 kg) per rack unit for equipment under 20-inches (508 mm) in depth; All equipment over 20-inches in depth requires rear rack angles for support

Product Attributes

Country of Origin	MX
Height (H)	43.8 in
Height (H)	1,113 mm
Width (W)	2.56 in
Width (W)	65 mm
Depth (D)	1.89 in
Depth (D)	48 mm
Hole Type	Square
Fits Frame Height	1200 mm
Rack Units	25
Color	Unpainted
Finish	Plated
Material	Mild Steel
Thickness (T)	14
Thickness (T)	1.9 mm

Documents

Spec Sheet (pdf)

ProLine G2 19-Inch Rack Angles, Sq Hole, 1200mm, Conductive, Steel

Specifications

Product Attributes

Documents

Royal Wholesale Electric