Crouse-Hinds series EPC combination line starters and enclosures are used for across-the-line starting of polyphase AC induction motors. They provide disconnecting means, motor branch circuit protection, motor running protection, undervoltage protection and remote starting and stopping due to the combination of thermal-magnetic circuit breaker and magnetic motor starter.

Eaton Crouse-Hinds series EPC START/STOP operating handle, With hardware, Used with EPC813, 87, 870, 871, 892 series combination motor starters

• Quick-opening covers – less than two turns to remove or install
• Water shedding construction with female threads on top cover, male threads on bottom cover and top cover skirted
• Breaker is trip-free of the handle; therefore, it will open under short circuit or overload, even if the external handle is locked in the “ON” position
• When interior mounting plate is removed, feeder and branch circuit conductors are easily pulled into the wiring chamber; the interior assembly, with breaker and starter attached, is then replaced, final connections made, and covers assembled
• Specially located stops and locks ensure adequate thread engagement and prevent overtightening
• Separate replaceable mounting bracket attached to the rear of the body provides three-point suspension for quick installation and leveling – one keyhole slot at top and two open slots at bottom
• Bodies have two taper tapped conduit hubs with integral bushings on the top, and two more directly below

Brand: Eaton

Add to Quote