EFS explosionproof fire alarm control stations from Eaton’s Crouse-Hinds Division are used to indicate at a remote location that a fire exists in the area. Applicable for use in areas which are hazardous due to the presence of flammable vapors, gases or highly combustible dusts. Ideal for installation at petroleum refineries, chemical and petrochemical plants and other process industry facilities where similar hazards exist.

Eaton Crouse-Hinds series EFS fire alarm control station, Feraloy iron alloy, Single-gang, 1, Dead end, 3/4″”

• Close tolerances in machining of wide, mating flanges and journalled shafts and bearings for front button operation, produces flametightness of enclosure joints
• Mounting lugs and taper tapped hubs with integral bushings
• Large machine screws for fastening covers to bodies
• When STOP is indicated, button is automatically red; when START is indicated, button is automatically green; otherwise, black buttons are standard
• Lockout provisions on front operated pushbutton (marked "STOP"" and ""OFF"") and selector switch covers
• Lockout hole for padlock having 1/4"" hasp is provided when used with covers for front lever and side rocker type operation
• On enclosures with front lever and side rocker type operating handles, threaded type shafts and bushings are used to ensure flametightness
• Dead end (EFS or EDS) or through feed (EFSC or EDSC) hubs – 1/2"" to 1"" sizes"

Brand: Eaton

Add to Quote