ECHF118
Eaton Crouse-Hinds series ECHF flexible fixture support
ECHF flexible fixture supports from Eaton’s Crouse-Hinds Division are used in hazardous locations where a light fixture must hang more than 12″ from its supporting junction box (as specified by NEC Article 501 and CEC Part I, Section 18). ECHF supports assure that fixtures hang plumb and will swing freely if accidentally struck, preventing damage to the fixture and supporting outlet fitting.”
Eaton Crouse-Hinds series ECHF flexible fixture support, 18″ flexible length, 125 lb, Brass, Pendant mount, 1/2″””
- Complies with NEC Article 501/CEC Part I, Section 18
- Free swinging in any direction through a large arc
- Good electrical continuity – no bonding jumpers needed
- Watertight construction
- Insulating liner of asphalt impregnated fiber to protect conductors
- Constructed to reinforced flexible metal hose
- Two female end fittings, each with a removable short nipple
- Nipples fit set screw type luminaire hubs
- Female end fittings are equipped with set screws to prevent turning during relamping and loosening of fitting with vibrations
Brand: Eaton
Add to QuoteSpecifications
| Catalog Number | ECHF118 |
|---|---|
| Brand | Eaton |
| Sub Brand | Crouse-Hinds series |
| Product Type | Flexible fixture support |
| Product Feature | Complies with NEC Article 501/CEC Part I, Section 18|Free swinging in any direction through a large arc|Good electrical continuity – no bonding jumpers needed|Watertight construction|Insulating liner of asphalt impregnated fiber to protect conductors|Constructed to reinforced flexible metal hose|Two female end fittings, each with a removable short nipple|Nipples fit set screw type luminaire hubs|Female end fittings are equipped with set screws to prevent turning during relamping and loosening of fitting with vibrations |
| Product Weight | 3.31 pound |
Informations
| Material | Brass |
|---|
