Eaton Crouse-Hinds series ECD combination breather/drain
Crouse-Hinds series ECD breathers and drains are for use in hazardous location conduit systems to drain accumulated condensate and provide ventilation to minimize condensation. A breather is installed in the top of an enclosure or in the upper section of a conduit system. A standard drain is installed in the bottom of an enclosure or in the lower section of a conduit system. At least one breather should be used with each drain. ECDs are also available in universal and combination models. A universal ECD functions as a breather when mounted at the top of an enclosure, or as a drain when mounted in the bottom of an enclosure. Combination ECDs are used in those applications where the use of a top mounted breather is not practical due to limited space, or in offshore and marine installations where moisture may enter the enclosure through the breather located on top of the enclosure.
Eaton Crouse-Hinds series ECD combination breather/drain, Stainless steel with neoprene tube, 1/2″”
- Standard ECD drains and breathers:
- Thread-in shaft design
- ECD11 and ECD13 have capability to pass 25 cc of water per minute and .05 cubic feet of air per minute at atmospheric pressure
- ECD387 and ECD16 can pass 15 cc of water per minute; ECD16 can pass .01 cubic feet of air per minute
- ECD1 N4D average drain rate is 13.5 cc per minute
- Universal drains and breathers:
- Patented labyrinth design
- Capability to pass 50 cc of water per minute and 0.2 cubic feet or air per minute at atmospheric pressure
- ECD15 and ECD385 each have a well inside the inner, threaded end to provide for accumulation of sediment without clogging when used as a drain
- Combination ECD breather and drain:
- Provides ventilation to minimize condensation and drains accumulated condensate – two functions performed by a single device installed in the bottom of an enclosure or conduit system
- Has the capability to pass 25 cc of water per minute and .10 cubic feet of air per minute at atmospheric pressure
- Thread-in-thread and labyrinth design
Brand: Eaton
Add to QuoteSpecifications
| Catalog Number | ECD18 |
|---|---|
| Brand | Eaton |
| Sub Brand | Crouse-Hinds series |
| Product Type | Combination breather/drain |
| Product Feature | Standard ECD drains and breathers:|Thread-in shaft design|ECD11 and ECD13 have capability to pass 25 cc of water per minute and .05 cubic feet of air per minute at atmospheric pressure|ECD387 and ECD16 can pass 15 cc of water per minute; ECD16 can pass .01 cubic feet of air per minute|ECD1 N4D average drain rate is 13.5 cc per minute|Universal drains and breathers:|Patented labyrinth design|Capability to pass 50 cc of water per minute and 0.2 cubic feet or air per minute at atmospheric pressure|ECD15 and ECD385 each have a well inside the inner, threaded end to provide for accumulation of sediment without clogging when used as a drain|Combination ECD breather and drain:|Provides ventilation to minimize condensation and drains accumulated condensate – two functions performed by a single device installed in the bottom of an enclosure or conduit system|Has the capability to pass 25 cc of water per minute and .10 cubic feet of air per minute at atmospheric pressure|Thread-in-thread and labyrinth design |
| Product Shape | Rectangular |
| Product Height | 3.1 inch |
| Product Width | 0.88 inch |
| Product Length | 1.02 inch |
| Product Weight | 0.23 pound |
Informations
| Material | Stainless steel with neoprene tube |
|---|
