Crouse-Hinds series Arktite EBBR interlocked receptacles are used as a service outlet for portable equipment in damp, wet, corrosive locations. Applicable in areas which are hazardous due to flammable vapors, gases or combustible dust (e.g. refineries and chemical plants), and in locations where frequent wash downs are necessary or where heavy rain or water spray is prevalent.

Eaton Crouse-Hinds series Arktite EBBR interlocked receptacle, 100A, 70A circuit breaker, Three-wire, four-pole, Solid door, With breaker, Style 2, Cutler-Hammer, Copper-free aluminum, Spring door, 1-1/2″, 480 Vac/250 Vdc”

• Semi-clamshell enclosure design, with an external machined flat joint flame path between body and cover, makes interior components easily accessible
• Component operating handles located through the right side wall of the body permits visual confirmation of correct component assembly and operation
• Plug and receptacle contacts cannot be made or broken under load; the circuit breaker cannot be closed until the plug is fully inserted and the plug cannot be withdrawn unless the breaker is de-energized
• Operating handles can be padlocked in either “ON” or “OFF” positions; breakers are trip-free of the handles and will open under short circuit or overload even if the handle is locked in the “ON” position
• Receptacles are mechanically interlocked with circuit breakers to provide disconnect means, short circuit protection and thermal time delay overload protection
• A spring door receptacle, located at the bottom of the unit, is mechanically interlocked with the circuit breaker operating mechanism for safe and dependable operation

Brand: Eaton

Add to Quote