Chico SpeedSeal compound lets you reliably install a complete explosionproof seal in five minutes. Chico SpeedSeal comes in a self-contained applicator kit that eliminates the need for measuring before mixing. Just pump to mix the material, inject the pre-measured amount, replace the plug and the fitting is sealed. It’s that easy. Chico SpeedSeal expands after injection to tightly fill the entire fitting, automatically separating the conductors. The time-consuming and tedious task of packing fiber to separate the individual conductors is eliminated. Once cured, Chico SpeedSeal forms an explosionproof seal around each electrical conductor in Eaton’s Crouse-Hinds series EYS and EYD sealing fittings, restricting the passage of gases, vapors or flames through the sealing fitting. SpeedSeal is approved for use in Class I, Division 1, Groups C, D and Class II, Division 1, Groups E, F, G.

Eaton Crouse-Hinds series Chico SpeedSeal sealing compound, 6 oz

• Expands in the sealing fitting, eliminating the need to separate the individual conductors with Chico X fiber
• Chico X fiber dams are not required in horizontal applications, reducing installation times
• Completely hardens in 20 minutes, simplifying use for OEMs
• Suitable for cold temperature environments without the costly need to build a temporary shelter around sealing fittings; all ice crystals must be removed from inside the conduit seal before dispensing Chico SpeedSeal compound
• Installs a reliable seal in five minutes – every time
• Hardens to a dense, strong mass that is suitable for Class I, Division 1, Groups C, D and Class II, Division 1, Groups E, F, G hazardous applications
• Packaged in a 2 oz. or 6 oz. pre-measured cartridge, eliminating the need for measuring before mixing
• Packaged with a screw-on nozzle for accurate dispensing

Brand: Eaton

Add to Quote